P10 Series User Manual

Preface

Thank you for choosing ATOTO

As an innovative brand with a decade of dedicated expertise in automotive electronics, ATOTO upholds the core philosophy of "Different. Better. Trusted". We seamlessly integrate professional audio-visual technology and user-friendly interactive features to elevate every journey with refreshing experiences.

• Different – We deliver products that stand apart through thoughtful design, innovation, and user‑oriented features.
• Better – We integrate professional audio‑visual technology with intuitive interaction to elevate every journey with superior experiences at an accessible price.
• Trusted – Endorsed by millions of users worldwide, ATOTO has earned a reputation for reliable products and responsive service you can count on.

This philosophy guides everything we do—from long‑term R&D investment, to continuous product improvement, to prompt customer support. With ATOTO, you can always expect something different, something better, and above all, something trusted.

Copyright Statement

The copyright and related intellectual property rights of these manuals (including electronic and printed versions) are exclusively owned by ATOTO. Without explicit written authorization from ATOTO, no organization or individual may use the content in any form (including but not limited to copying, distributing, adapting, translating, mirroring, or reposting) for commercial purposes or provide it to third parties.

FCC Compliance Statement

The FCC Compliance Statement is an official declaration by ATOTO to users indicating that the product complies with the radio frequency interference and electromagnetic compatibility (EMC) regulations of the U.S. Federal Communications Commission (FCC). The specific statement is as follows:

This device strictly complies with all provisions of Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device must not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Contact Us

Email: support@atotoglobal.com

If you encounter any issues during installation or use, our support team is ready to assist.

Chapter 1 Important Information

1.1 About this Manual

The P10 Series is a Portable Smart CarPlay Display (PSCD), hereafter referred to as “P10” in this manual.

The P10 Series includes models with different screen sizes, such as 9-inch and 10.25-inch versions. All models share the same functionality, though certain elements—such as screen ratio, sensor placement, or shortcut bar position—may vary slightly by size. Unless otherwise noted, all interface images and descriptions in this manual are based on the 9-inch P10 Series models.

This manual provides information on installing, connecting, and operating the ATOTO P10 Series Portable Smart CarPlay Display. It includes an overview of key functions, as well as installation and connection guidelines, and instructions for using its features.

To make full use of your P10, please read the manual carefully before first use and refer back to it when needed. Keep it in an accessible place for future reference.

If you are unfamiliar with car electronics or lack installation experience, we strongly recommend seeking professional assistance to avoid potential injury or damage during installation.

Note: Some app interfaces or screenshots in this manual are for reference only. Due to version updates, the actual interface may differ. Please follow the latest version displayed on your device.

1.2 Operation Warnings

1.2.1 Safety Instructions

• Do not open the product or the battery under any circumstances.
• For reasons of safety and security, the device must only be opened by a professional.
• No modifications of the product are permitted; any such modification leads to the loss of the operating permission.
• Damage resulting from misuse, impact, or unauthorized disassembly is not covered by the warranty.
• It is forbidden to exceed the supply voltages (Volts) specified for the mains adapter, the motor vehicle charging adapter and the product.
• Use only the charger supplied with your device. Use of another type of charger will result in malfunction and/or danger.
• Do not use the charger in a high moisture environment. Never touch the charger when your hands or feet are wet.
• Dispose of the used product or the battery according to the legal regulations in effect.
• Operating temperature: -20 °C to 60 °C (-4 °F to 140 °F)
• Always observe safe driving practices.
• Before you use your P10 for the first time, familiarize yourself with your device and its operation.
• Imprecise or incorrect directions may be provided due to changing traffic patterns or deviations in data.

⚠️Warning:

• Do not use sharp-edged objects on the device touch screen.
• The device is not waterproof and is not protected against water damage.
• Protect the device from extreme temperatures.

1.2.2 Safety Warnings and Precautions

Applications:

• This manual is applicable to ATOTO P10 Series Portable Smart CarPlay Display. Newly released models may have extra functions that are not mentioned.
• The list of accessories and the back panel may vary slightly depending on the specific model and the region of sale, but the system, UI, and product hardware information remain consistent.
• The images provided in this manual may be different from what’s displayed on the current system.
• ATOTO may release new system updates, which may include changes made or newly added functions that are not mentioned here.
• The information in this manual may be insufficient. If you have any questions or problems concerning your device that are not covered in this manual, consult customer support.

Safety Notice:

• Do not view or operate video functions while driving. Distraction from video use can lead to accidents. The manufacturer is not liable for any injuries or damages caused by driver distraction.

Friendly Reminder:

• The screenshot images provided in this manual may be different from what’s displayed on the current system.
• ATOTO may release new system updates, which may include changes made or newly added functions that are not mentioned here.
• The information in this manual may be insufficient. If you have any questions or problems concerning your unit that are not covered in this manual, consult customer support.

1.3 Notice

• Apple CarPlay is a trademark of Apple Inc.
• iPhone® is a trademark of Apple Inc., registered in the U.S. and other countries.
• Use of the Apple CarPlay logo indicates that this product’s user interface meets Apple performance standards.
• Apple Inc. is not responsible for the operation of this device or its compliance with safety and regulatory requirements.
• ATOTO is not affiliated with Apple Inc.

• Android Auto is a trademark of Google LLC.

• The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by ATOTO are under license.
• All other trademarks and trade names mentioned are the property of their respective owners.

Chapter 2 What Comes in the Box

2.1 Package Contents

Your ATOTO P10 Series Portable Smart CarPlay Display package includes the following items:

• P10 Portable Smart CarPlay Display
• AutoNap Holder Battery & Power Cable
• Car Charger (Cigarette Lighter Adapter)
• USB Type-C Cable
• AUX Audio Cable
• Metal Mount & Holder Adapter
• Online Resources Quick Guide
• Product Care Online Support

Note: GPS antenna is included in some packages only. Please refer to the actual product received.

2.2 Optional Accessories (Sold Separately)

The P10 supports various external accessories used for information display, vehicle status monitoring, camera expansion, interior lighting enhancement, and audio system expansion.

Compatible accessories may be updated or expanded in future product releases.

The following lists categorize currently supported accessories by type for reference.

Note: The accessories listed below are optional. Most accessories are sold separately, depending on the specific package and SKU.

Camera Accessories

The P10 series supports the following models:

• AC-P106C25 (Wired Backup Camera)
• WR2-12HDLR (Wireless Vehicle Camera System)

Vehicle Monitoring Accessories

Used for monitoring vehicle status and safety-related data.

The P10 series supports the following models:

• AC-4450 (Bluetooth OBD II Diagnostic Scanner)
• AC-UTP1 (Tire Pressure Monitoring System, TPMS)

Interactive LED Sign

Used for external messaging, emojis, and interactive display.

The P10 series supports the following models:

• CI-IALD13 (13.5" AI Interactive LED Sign)
• CI-IALD19 (19" AI Interactive LED Sign)
• CI-VIALD13 (13.5" AI Interactive LED Sign)
• CI-VIALD19 (19" AI Interactive LED Sign)
• INT21A (21" Premium Bluetooth LED Message Sign)
• INT21B (21" Premium Bluetooth LED Message Sign)

Ambient Lighting Accessories

Used for interior ambient lighting and footwell illumination inside the vehicle.

The P10 series supports the following models:

• AL-ILS150-150(Car Interior Ambient Light)
• AL-ILS60-100(Car Interior Footwell Light)
• CI-FLT01(Car Interior Footwell Light)

Smart LED Light

Used for off-road driving, work lighting, and high-intensity exterior illumination.

The P10 series supports the following models:

• AL-4IN6-18W
• AL-8IN20-120W
• AL-12IN24-72W
• AL-F14-18W
• AL-4_5O14-42W
• AL-F14-36W

Vehicle Sunshade

Used to reduce sunlight exposure and improve in-vehicle comfort.

The P10 series supports the following models:

• AL-ZYZS01 (Smart Sunshade)

Chapter 3 Product Appearance

3.1 Front Panel Overview

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

【AI图解：This image shows the front panel of the P10, with two built-in microphones (MIC1 and MIC2) located at the lower section.】

No.1

Name: Built-in Microphone

Function: It is used for Bluetooth Hands-free and Voice Commands with Noise Reduction.

3.2 Rear Panel Components & Functions

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

【AI图解：This image shows the rear panel of the device. The components are described in a defined reading order for reference mapping. The top center component is No.1 Front & Cabin Camera. The upper side component is No.2 Light Sensor, located on the upper-right side for the 10.25-inch model and on the upper-left side for the 9-inch model. The center mounting area is No.3 Holder Adapter Slot. The right-side vertical column is arranged from top to bottom as follows: No.4 Power Button, No.5 USB-C Port, No.6 USB-C Port (WRC), and No.7 Reset (RST). The bottom row is arranged from right to left as No.8 TF Card Slot, No.9 External Camera Input, No.10 AUX-OUT, No.11 Power Input, and No.12 SIM Card Slot. The numbering follows this directional sequence.】

No.1

Name: Front & Cabin Camera

Function: Captures both the road ahead and the vehicle cabin simultaneously.

No.2

Name: Light Sensor

Function: Built-in light sensor automatically adjusts screen brightness based on ambient light conditions.

No.3

Name: Holder Adapter Slot

Function: For mounting the device to the holder bracket.

No.4

Name: Power Button

Function: Short press to turn screen on/off.

Long press for 10 seconds to reset the device to factory settings.

Warning: A factory reset will erase all data from this device and cannot be restored.

No.5

Name: USB-C Port

Function: Connect a USB flash drive for local media playback or file transfer.

No.6

Name: USB-C Port (WRC)

Function: Connect receiver box for wireless camera video.

No.7

Name: Reset(RST)

Function: Used to restart the system in case of device freezing or malfunction.

No.8

Name: TF Card Slot

Function: Insert a Micro SD card to expand storage(Up to 256GB).

No.9

Name: External Camera Input

Function: Supports a wired camera, which can be used for reversing or in-cabin monitoring depending on the installation location.

No.10

Name: AUX-OUT

Function: Connect an AUX audio cable to this port, and plug the other end into the car stereo’s AUX-IN port to transmit audio.

No.11

Name: Power Input

Function: Connect to external power source. Supports DC 12V–16V input. Please use the original power cable.

No.12

Name: SIM Card Slot

Function: For Nano SIM card insertion to enable mobile network connectivity.

Chapter 4 Installation and Power Connection

4.1 Mount Installation

4.1.1 Safety Notes

• Do not install the device on the windshield.
• To avoid obstructing the driver’s view, install the unit in the blank area of the dashboard below the rearview mirror.
• Before attaching the base, thoroughly clean the surface of the dashboard with alcohol or a cleaning agent. Allow it to dry completely to ensure maximum adhesion.
• Always perform a trial positioning before final installation to confirm that the mounting location and front-camera viewing angle are appropriate and will not interfere with driving.

4.1.2 Installation Steps

1. Attach the Upper Bracket

Align the long oval-shaped upper bracket with the 4 holes of the Holder Adapter Slot on the back of the P10, ensuring that the arrows on both the bracket and the P10 slot are pointing in the same direction. Push firmly until a “click” sound is heard, indicating the bracket is securely engaged.

1. Insert the Lock Ring

Slide the lock ring onto the ball head of the bracket arm, ensuring the wider opening faces the upper bracket.

1. Connect Ball Head

Align the ball head of the bracket arm with the nut hole on the upper bracket and push it into place, then slide the locking ring forward and tighten it clockwise to securely lock the assembly.

1. Mount the Base

• Place the base on the desired area of the dashboard and perform a trial placement to ensure it does not block the driver’s view or interfere with operation.
• Clean and dry the dashboard surface thoroughly with alcohol or a suitable cleaning agent, making sure it is free from dust and grease.
• Peel off the red 3M VHB tape from the base.
• Press the base firmly against the dashboard, applying consistent pressure (≥100 kPa) for 20–30 seconds to ensure initial adhesion.

Note: The VHB tape provides immediate adhesion to support some load, but full bond strength develops within 24–72 hours at room temperature; lower temperatures may require longer to reach full strength.

1. Adjust and Secure

Loosen the lock ring slightly to tilt or rotate the screen for the best viewing angle. After adjustment, retighten the lock ring.

Finally, use a hex key to tighten all screws on the bracket arm, ensuring the entire assembly is fully locked and stable.

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

4.1.3 Installation Options

CAUTION:

• Before removing the adhesive backing, test the mounting position and adjust the bracket angle according to your dashboard layout and viewing preference. At the same time, check the front camera’s field of view to ensure the lens is not blocked by the dashboard, windshield, or rearview mirror, and that the image is clear and unobstructed.
• Adjust the bracket angle based on your dashboard layout and viewing preferences.
• For better adhesion, clean the mounting surface with alcohol or a cleaning wipe before applying the adhesive. This helps ensure a secure and long-lasting bond.
• Once applied, it's difficult to reposition — so take a moment to find the spot that works best for you.
• After adjusting the mount to the desired angle, tighten all hex screws to ensure stability.

1. Standard Dashboard Mount

Mount the bracket on the dashboard.

Place the support pad vertically.

Ensure the bottom edge of the P10 screen rests on the base’s support pad for better stability and shock absorption.

2. Hanging Mount

Mount the bracket at the edge of the dashboard.

Position the front end of the bracket arm as close as possible to the dashboard surface for a low-profile installation. .

Use a strap to organize and secure any excess cables, ensuring stable power and a tidy dashboard.

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

4.2 Power Connection

Locate the Power Input Port

• The power input port is located inside the recessed area on the underside of the P10, to the lower-left of the Holder Adapter Slot, near the bottom edge.
• Insert the power cable only into the port labeled “POWER.”
• Warning: Do not connect the power cable to the rear-facing ports, as this may damage the device.

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

Power Connection via AutoNap

• Connect the L-shaped end from AutoNap to the P10's Power port.
• Connect AutoNap's straight USB-C connector to the C1 port on the Car Charger.

Power via AutoNap

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

Note: AutoNap is a smart power device designed for P10 and other car electronics—cup holder–friendly, battery-powered, and ready to wake your P10 instantly, without messy wiring or fuse tapping.

Chapter 5 Home Screen

5.1 Home Screen Layout

After connecting power, the P10 lights up. Familiarize yourself with the icons and menus for easier navigation.

The P10 home screen is customizable, allowing you to arrange widgets to suit your preferences. Widgets are small on-screen modules that provide quick access to specific functions or display real-time information. You can add, move, or remove widgets to create a layout that best fits your needs.

Regardless of the selected home screen style, the overall layout follows the same structure:

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

【AI图解：This image shows the P10 Home Screen layout divided into four labeled areas. Area A (Top Status Bar) displays key system indicators such as volume, network status, and time. Swiping down from the top-right opens message notifications, while swiping down from the top-left opens the Quick Settings panel. Area B (Main Home Screen Area) is the central customizable widget and app display section, supporting DVR preview, date, weather, location, and application shortcuts. Area C (Shortcut Bar) provides quick access to media controls and frequently used apps; on 9-inch models it is located at the bottom, and on 10.25-inch models it is positioned on the left side. Area D (All Apps / App Drawer) is accessed by tapping the square icon in the center of the Shortcut Bar to open the full application list.】

5.1.1 Top Status Bar(Area A)

This area displays essential indicators such as volume, network state and time.

Note:

By default, swiping down from the top right of the status bar opens the message notifications, while swiping down from the top left of the status bar opens the quick settings panel (used for accessing Bluetooth management, screen brightness adjustment, volume adjustment, etc. in the expanded interface).

5.1.2 Main Home Screen Area (Area B)

The central part of the home screen lets you place and customize widgets such as DVR preview, date, weather, and location, as well as apps like YouTube or Spotify. You can choose from three preset styles in Settings > AA icon > Home Screen, or edit and create your own style. To activate the selected layout, tap Apply at the top.

5.1.3 Shortcut Bar(Area C)

The Shortcut Bar provides quick access to frequently used controls and apps, such as previous/next track, volume adjustment, and selected applications.

In the P10 series, its position varies by screen size: on the 9-inch models, it is located at the bottom of the home screen, while on the 10.25-inch models, it is placed on the left side of the screen.

5.1.4 All Apps/App Drawer (Area D)

Tap the square icon in the center of the Shortcut Bar to open the All Apps screen and view all installed applications.

5.2 Customizing the Home Screen

The P10 home screen is fully customizable, offering three style layouts.

In all three home screen styles, the main elements include:

• DVR Preview Widget – Quick access to live views from the front and interior cameras.
• Time Display – Shows the current time for quick reference while driving.
• Date, Weather & Location – Displays the current date, local weather, and your geographic location.
• Audio Output Mode – Indicates the current audio output mode (e.g., built-in speaker, Bluetooth, AUX,FM).
• Applications – Installed apps can be placed on the home screen for quick access.
• Chrome Search – Quick access to web search using Google Chrome.

Style 1:

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

Style 2:

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

Style 3:

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

Customizing the Home Screen:

• Remove a Widget: Press and hold the widget, then drag it to the × Remove area at the top of the screen.
• Change Wallpaper or Add Widgets: Press and hold any blank area on the home screen. Two options will appear: Wallpaper and Widgets. Select Wallpaper to change the background image, or select Widgets to choose and add new widgets to the home screen.

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

In the Widgets menu, categories are listed vertically on the left, such as Widget, Audio Out, Car Widget, Chrome, Compass, and others. Widgets are available in different sizes and layouts. To add one to the home screen, press and hold your chosen widget, then drag it to the desired position.

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

5.3 Control Panel

The Control Panel provides quick access to essential system functions. From the P10 home screen, swipe down from the upper left corner of the Status Bar to open it.

Quick Settings Panel(Control Center)

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

【AI图解：This image shows the Quick Settings Panel icon reference. No.1 is a broadcast signal icon, representing Hotspot. No.2 is a mobile data signal icon, representing Mobile Data. No.3 is a rocket icon, representing Clean Memory. No.4 is a circular arrow icon, representing Restart. No.5 is the Bluetooth symbol, representing Bluetooth. No.6 is a Wi-Fi signal icon, representing Wi-Fi. No.7 is a house icon, representing Home Screen. No.8 is a scissors icon, representing Screenshot. No.9 is an image/photo icon, representing Gallery. No.10 is a gear icon, representing Settings. No.11 is a video camera icon, representing Screen Recorder. No.12 is a pencil/edit icon, representing Edit. No.13 is a speaker icon, representing Volume Control. No.14 is a sun icon, representing Brightness Adjustment.】

1.Hotspot: Tap to turn the hotspot on or off. Press and hold to open the Hotspot settings screen. In the settings screen, you can change the hotspot name, password, and other options.

2.Mobile Data: Tap to enable or disable mobile data. Press and hold to open the Mobile Network settings screen.

3.Clean Memory: Tap to free system memory and speed up the system.

4.Restart: Tap to restart the system.

5.Bluetooth: Press and hold to open the Bluetooth settings screen, where you can pair devices, manage connections, and adjust Bluetooth settings.

6.Wi-Fi: Tap to turn Wi-Fi on or off. Press and hold to open the Wi-Fi connection settings screen.

7. Home Screen: Tap to return to the home screen.

8. Screenshot: Tap to capture an image of the current screen.

9. Gallery: Tap to launch the Screen Saver.

Note: Before using the screen saver, make sure the photo source has been set up in advance.

Go to Settings App > Display (AA icon) > Screen Saver.

Under Choose a screen saver, select a style (such as Photo Frame or Photo Table) and tap Customize to choose image folders (e.g., DCIM). Starts the screen saver automatically after the selected period of inactivity.

10. Settings: Tap to access System Settings Interface.

11. DVR: Tap to view real-time footage from the Front & Cabin cameras.

12. Edit:Tap to replace or add function icons in the Control Center. The total number of icons is fixed, so you must remove an existing icon before adding a new one. You can also tap Reset to restore the default icon layout.

13. Volume Adjustment Slider Bar: Drag the slider to adjust the volume. Tap the speaker icon to mute or unmute the sound.

14. Brightness Adjustment Slider Bar: Drag the slider to adjust the screen brightness. Tap the sun icon to enable Auto Brightness (an “A” indicates auto mode).

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

【AI图解：This image shows additional Quick Settings Panel icons. No.15 is an eye icon, representing Screen Monitoring or View Mode. No.16 is a circle with a minus symbol, representing Do Not Disturb mode. No.17 is a display screen icon with an “X”, representing Turn Off Screen. No.18 is a sun icon, representing Brightness Control.】

15. Eye Comfort Mode: Reduces blue light from the screen.

16. Do Not Disturb Mode: Silences incoming notifications and alerts.

17. Screen Off: Turns off the display

18. Day/Night Mode: Switches between light (day) and dark (night) display themes for different lighting conditions.

Note: Swipe down from the right side of the screen to view notifications and stay informed of important information. Most notifications can be cleared by swiping left, except for certain system notifications.

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

Chapter 6 Bluetooth Connection

6.1 Bluetooth Functionality

The device provides two types of Bluetooth functions to meet different needs:

Handsfree BT

• Music playback
• Hands-free calls

System BT

• Connects to external Bluetooth devices such as OBD diagnostic tools, keyboards, mice, and gamepads.
• Bluetooth tethering: share your phone’s mobile data connection with the device for internet access.

6.2 Handsfree Bluetooth Connection

6.2.1 Bluetooth Pairing

To use Bluetooth music and hands-free calling, follow these steps:

Step 1: Pair Your Phone

Open the Handsfree BT app. Tap the Bluetooth phone icon in the left sidebar, then tap Search on the right. When your phone appears in the list, tap to select it, then tap Connect on the right. A pairing request will appear on your phone — confirm to pair.

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

Step 2: Authorize Access

Grant permission to access your contacts when prompted. This is required for hands-free calling.

Step 3: Use Bluetooth Features

Once connected, the four icons at the top will become active. Tap the music icon to play audio from your phone through the P10 device.

6.2.2 Connection Preferences

Tap the gear icon at the bottom of the left sidebar to enter the Bluetooth settings screen.

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

Switch Indicators:

Green = On

Gray = Off

Bluetooth Switch: Turn Bluetooth on or off.

Auto Answer: Calls are automatically answered after 2 seconds of ringing.

Auto Connect: When enabled, the device automatically connects to previously paired devices within range.

Device Name: Shows the P10's name for pairing. Tap to rename.

Auto-enable CPAA: When enabled, CarPlay/Android Auto will automatically turn on after Bluetooth connection.

6.3 System Bluetooth

The system Bluetooth supports both data transmission and Bluetooth Low Energy (BLE) connections. This allows the P10 to pair with devices such as OBD diagnostic tools, keyboards, mice, and game controllers. In addition, the system supports Bluetooth tethering, enabling users to share a smartphone’s internet connection with the P10 for convenient online access while driving.

Primary Uses

File Transmission: Transfer files between a smartphone and the P10.

External Device Connection: Pair with OBDII diagnostic tools, keyboards, mice, and game controllers.

Bluetooth Tethering: Share your smartphone’s internet connection with the P10.

6.3.1 Bluetooth pairing

Tap the System Bluetooth app, or go to Settings App > Gear Icon > System BT.

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

Pairing a New Device:

1. Make sure the device you want to pair is powered on and in Bluetooth pairing mode.

If pairing a phone, ensure Bluetooth is turned on and the phone is visible to nearby devices.

1. On the P10, go to the Settings App> Settings (Gear Icon) > System BT, then tap Pair New Device.
2. Find your phone in the device list and tap it to start pairing.
3. Confirm the pairing prompts on both your phone and the P10 by selecting Pair.
4. Once pairing is successful, the phone will generally enable Bluetooth tethering automatically. If mobile data is active, the P10 can use your phone’s internet connection.

Additional Notes:

• This connection process also applies to BLE devices.
• Some products allow direct BLE device search through the dedicated app.

Saved Devices:

• Tap See All to view all previously paired and saved Bluetooth devices. You can manage, reconnect, or remove devices from this list.

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

Connection Preferences:

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

• Bluetooth: Turn Bluetooth on or off, pair new devices, and set the device name.
• Cast: Wirelessly display your device screen on compatible displays.
• Chromebook: Connect your phone to a Chromebook to send texts, share internet, and simplify unlocking.
• Nearby Share: Quickly share files with nearby devices.

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

6.3.2 Bluetooth Tethering

When your smartphone is paired with the P10 via system Bluetooth, internet sharing (Bluetooth tethering) is enabled by default. This allows the P10 to access the internet directly using your smartphone’s mobile data connection.

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

Note: Please be aware that this function consumes data from your mobile plan. Charges may apply depending on your carrier and data package. If you do not need internet access, tap your paired phone name, then switch off Internet access.

Chapter 7 CarPlay/Android Auto

Note：The P10 series supports only wireless CarPlay and wireless Android Auto.

7.1 Compatibility

Wireless CarPlay is available on iPhone 5 and later models with iOS 9.0 and higher.

Wireless Android Auto is compatible with these Android versions:

1. Any phone with Android 11.0 and higher.
2. A Google or Samsung phone with Android 10.0.
3. A Samsung Galaxy S8, Galaxy S8+, or Note 8, with Android 9.0.

7.2 Pre-connection Settings

• On the P10, tap the CarPlay/AA application to enter the interface.
• Before connecting a device, you can tap the Settings icon to access the settings menu, allowing you to select an interface layout that suits your driving preferences.

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

• The settings menu includes Driver Position, Floating Navigation, FPS Engine, and Default Connection Type, which you can configure according to your preferences, as well as Check for Updates, About, and Device Info.

Driver Position – Adjust the interface layout for left- or right-hand drive.

FPS Engine – When enabled, it improves visual smoothness but may

increase power consumption and heat. Enable based on actual needs.

Floating Navigation – A floating window for quick access.

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

7.3 CarPlay/AA App

7.3.1 CarPlay Connection

Wireless CarPlay Connection Steps:

1. On your iPhone, turn on Bluetooth and enter the Bluetooth Settings screen (by long-pressing the Bluetooth icon in Control Panel).
2. On the P10, enable Bluetooth (by long-pressing the Bluetooth icon in the drop-down Control Panel, or by opening the Handsfree BT application to enter the Bluetooth interface).

Then, tap Search on the right sidebar to scan for devices.

When your iPhone name appears in the list, select it and tap Connect on the right sidebar.

After that, confirm the Bluetooth pairing request on your iPhone.

1. Once the P10 shows the status Connected, open the CarPlay/AA application. Ensure that the current mode is set to CarPlay. If another mode (Android Auto or Screen Mirroring) is selected, tap the Mode Selector icon located at the bottom center of the screen, then select CarPlay to continue.

1. The “Connect to CarPlay” prompt will appear on your iPhone — tap Connect to launch CarPlay.
2. The CarPlay interface will appear on the P10 display, and you can now use supported apps such as navigation, music, messaging, and phone calls.

Notes:

1. Some iPhones require enabling CarPlay manually:

Go to Settings App > General > CarPlay, select the P10 device name, and enable CarPlay.

1. In the CarPlay/AA application, make sure the current mode is set to CarPlay.

If the mode is set to Android Auto or Screen Mirroring, CarPlay will not launch automatically.

7.3.2 Android Auto Connection

Wireless Android Auto Connection Steps:

1. On your Android phone, turn on Bluetooth and open the Bluetooth settings screen (by long-pressing the Bluetooth icon in Control Panel).
2. On the P10, enable Bluetooth (by long-pressing the Bluetooth icon in the drop-down Control Panel, or by opening the Handsfree BT application).

Tap Search on the right sidebar. When your phone name appears in the device list, select it and tap Connect. Then confirm the Bluetooth pairing request on your phone.

1. When the P10 shows the status Connected, open the CarPlay/AA (CPAA) application, and ensure the current mode is set to Android Auto.

If the mode is set to CarPlay or Screen Mirroring, Android Auto will not launch.

Tap the Mode Selector icon at the bottom center of the screen and select Android Auto.

1. Once connected, the Android Auto interface will appear on the P10 display. You can now use supported apps such as navigation, music, messaging, and calls.

Note: For some Android phones, Wi-Fi must be turned on during the Android Auto connection process, but it should not be connected to any other Wi-Fi networks.

Chapter 8 Phone Mirroring

The P10 supports wireless mirroring only.

For iPhone:

Please connect your iPhone to the P10’s Wi-Fi hotspot to ensure both devices are on the same network.

For Android phones:

We recommend connecting the P10 to your phone’s hotspot for a more stable mirroring experience.

A shared local network (such as the same Wi-Fi router) may also work, depending on the network environment.

8.1 Operation Guide

Open the CarPlay/AA application on the P10, then check the icon on the left side of the Mode Selector to confirm the current mode is MIRROR. If it is not, tap the Mode Selector and select MIRROR.

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

8.2 iPhone Wireless Mirroring

Before starting, make sure the current mode in the CarPlay/AA application is set to MIRROR.

iPhone Wireless Mirroring – Connection Steps:

1. Enable the Wi-Fi Hotspot on the P10

On the P10, swipe down the Control Panel, press and hold the Wi-Fi Hotspot icon to open its options, then turn on Use WiFi Hotspot and set a password if needed

1. Connect the iPhone to the P10 Hotspot

On your iPhone, long-press the Wi-Fi icon to enter Wi-Fi settings, select the P10 hotspot name from the list, and enter the password to connect.

1. Start Wireless Mirroring

Open the Carplay/AA application on the P10 and confirm the mode is MIRROR. Then swipe down the Control Center on the iPhone, tap Screen Mirroring, and select the device name beginning with zLink to complete the wireless mirroring connection.

Tip: Tap the question mark icon in the upper-left corner of the Carplay/AA interface to open the Help page, where the zLink ID is displayed in the upper-right corner for identifying the correct device.

8.3 Android Wireless Mirroring

Before starting, ensure the following:

• The current mode in Carplay/AA is set to MIRROR

• It is recommended to connect the P10 to your phone’s hotspot for better stability

• The KAOLS app is installed and an account has been registered and signed in

Note: When launching KAOLS for the first time, network or location permission prompts may appear. Please grant them as needed.

KAOLS App Installation & Setup:

1. While in MIRROR mode of the CarPlay/AA application, tap the question mark icon in the upper-left corner to open the Help page and scan the QR code to download KAOLS, or search KAOLS in the Google Play Store.

1. Open KAOLS and tap Register now when launching the app for the first time. Verify your email, set a password, and then sign in.

1. You must be signed in to search for and connect to the P10, and network or location permission prompts will appear when KAOLS is launched for the first time.

About zLink ID:

The zLink ID is used by the KAOLS app to find and connect to your P10. It is displayed in the upper-right corner of the Help page, which you can access by tapping the question mark icon in the upper-left corner of the CarPlay/AA interface.

Android Wireless Mirroring – Connection Steps:

1. Enable the personal hotspot on your Android phone and set a password for easier connection.
2. On the P10, turn on Wi-Fi and connect it to your phone’s hotspot. After the connection is established, open the CarPlay/AA application and ensure the current mode is set to MIRROR.
3. Launch the KAOLS app on your phone. Tap the “+ / Please connect device” button in the upper-left corner, then tap Scan to search for devices.

1. When a device name starting with zLink appears, tap it to connect.
2. When a pop-up message appears stating Start recording or casting, tap Start now. The P10 will then display the Android mirroring interface.

Chapter 9 Internet

9.1 Networking Options

The P10 supports four methods of internet connectivity. Users can select the option that best matches their needs, driving scenarios, and data plan.

1. Wi-Fi Connection

Connect the P10 to a Wi-Fi hotspot provided by a home router, a smartphone, or a portable mobile Wi-Fi device.

1. Bluetooth Tethering

Connect the P10 to your smartphone via the system Bluetooth. Once paired, the P10 will use your smartphone’s mobile data connection for internet access.

1. USB Tethering

Connect your smartphone to the P10 using a USB cable to share its internet connection. For reliable performance, always use the original USB cable supplied with your smartphone. If a confirmation pop-up appears on your phone, select Trust or Allow to enable the connection.

1. Cellular Network
   1. Physical SIM: Insert a 4G Nano SIM card with an active data plan.
   2. Cloud SIM: Activate the built-in Cloud SIM service when powering on the P10. Follow the on-screen instructions to complete setup.

Note: When using the EIOTCLUB SIM or an active Cloud SIM connection, the P10 can also act as an in-vehicle hotspot, sharing its internet connection with other devices such as smartphones, tablets, or laptops.

However, some SIM cards issued directly by mobile carriers may not support data sharing with third-party devices, depending on the carrier’s plan.

To enable the Wi-Fi hotspot

Go to Settings App > Network Settings (antenna icon) > Hotspot > Wi-Fi hotspot.

About Physical SIM (EIOTCLUB) and Cloud SIM:

The EIOTCLUB Physical SIM and Cloud SIM services are optional third-party data services provided independently. ATOTO does not sell or manage these services, and users may use their own SIM card or any compatible IoT SIM instead.

9.2 Wi-Fi Connection

On the P10, you can connect to Wi-Fi in two ways:

• Quick Access: Swipe down the status bar and long-press the Wi-Fi icon.
• Menu Path: Go to Settings App > Network Settings (antenna icon)> WLAN

Turn on the Wi-Fi switch, select Wi-Fi network name from the list of available networks, and enter the password if required.

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

9.3 Bluetooth Tethering

The P10 can access the internet through your smartphone’s mobile data connection once the two devices are paired via system Bluetooth. Before pairing, enable Bluetooth Tethering on your smartphone. On some devices, this option can be found under Settings > Connection & Sharing > Bluetooth Tethering

Steps:

1. On the P10, go to the Settings App> Settings (Gear Icon) > System BT, then tap Pair New Device.
2. Turn on Bluetooth on your smartphone and make it discoverable.
3. In the Available devices list on the P10, select your phone’s name to pair. If a confirmation pop-up appears on your phone, tap Pair to complete the pairing.

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

1. Once paired, a Bluetooth tethering icon will appear in the status bar, indicating that the internet connection is active.

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

9.4 USB Tethering

USB tethering allows the P10 to use your smartphone’s mobile data connection through a USB cable.

Steps

1. Connect your smartphone to the P10 using the original USB cable.
2. On your smartphone, enable USB Tethering (common path: Settings > Connection & Sharing > Personal Hotspot > USB Tethering, or a similar path). This option is usually greyed out until the phone is connected.
3. Some devices may display a confirmation pop-up (such as Allow or Trust) before the connection is enabled. Approve the request if prompted.
4. Once connected, you can open the web browser on the P10 and visit any website to confirm internet access.

9.5 Cellular Network (SIM & eSIM)

To enable mobile data:

• Quick Access: Swipe down to open the control panel, then long-press the mobile data icon.
• Menu Path: Go to Settings App > Network Settings (antenna icon) > Mobile Network, then switch on Mobile Data. Turn on Data Roaming only if needed.

P10 supports two types of 4G network connections:

1. Physical SIM card: You may insert the included EIOTCLUB SIM card, or use your own compatible IoT SIM card from a supported carrier.

The EIOTCLUB SIM card and its related data services are provided by a third-party service provider.

Users are free to choose whether to use the included EIOTCLUB SIM card or any other compatible SIM card. The included SIM card is optional and not required for P10’s connectivity.

1. Cloud SIM (eSIM): Connect via the built-in Cloud SIM service.

9.5.1 EIOTCLUB SIM Card

9.5.1.1 EIOTCLUB SIM Service Disclaimer

EIOTCLUB IoT DATA SIM CARD and its related applications and services are independently provided by EIOTCLUB TECHNOLOGY CO., LIMITED.

ATOTO is not involved in the development, operation, or any commercial activities of this application or its associated services.

All fees, data plans, service agreements, and service quality related to this offering are solely provided and managed by EIOTCLUB TECHNOLOGY CO., LIMITED.

ATOTO and the manufacturer of the P10 device assume no responsibility for this service. A single SIM card is included in the P10 package, and the P10 system only provides compatibility support for the related application, allowing users to decide independently whether to use it.

If you encounter functional issues, plan subscriptions, payment problems, or service quality concerns during use, please contact EIOTCLUB's service provider directly.

Please note: All subscriptions, network connectivity, plan purchases, service terms, and other aspects of the EIOTCLUB IoT DATA SIM CARD and its related applications and services are entirely under the ownership of EIOTCLUB TECHNOLOGY CO., LIMITED.

There is no equity, partnership, or commercial cooperation between ATOTO, the developer or manufacturer of the P10 device, and EIOTCLUB TECHNOLOGY CO., LIMITED.

Use of this service is entirely at the user's sole discretion. ATOTO, as the provider of the technical platform, does not assume any direct or indirect liability for connection failures, plan disputes, or privacy breaches resulting from third-party services.

9.5.1.2 Activate EIOTCLUB SIM Card

Scan the QR code provided or visit the website listed in the guide to activate the EIOTCLUB SIM card and access more information.

A trial data package may be provided for initial use when activating the SIM card. Trial data availability, amount, and duration are determined by the SIM service provider and may change over time.

After the trial period—or if additional data is needed—you can easily recharge or extend the service by purchasing data plans from EIOTCLUB.

There are no contracts; you only pay for the data you use.

The SIM card operates on major 4G LTE networks (such as AT&T and T-Mobile in the U.S.), providing reliable coverage and stable data speeds.

Note: SIM card services, data plans, and related terms are provided and managed by the service provider. ATOTO does not manage or control these services.

9.5.1.3 About EIOTCLUB SIM Card

Prerequisites & Important Notes:

• SIM Card Type: Nano SIM card.

• Data Plan Required: An active mobile data plan from a compatible local carrier is required.
• SIM Activation: Make sure the SIM card is activated and tested in another device (such as a smartphone) before inserting it into the P10.
• SIM PIN Lock: If the SIM card has a PIN lock enabled, disable it on a phone first.

The P10 does not support entering or unlocking SIM PIN codes

• Carrier Compatibility: Some carriers may not support the P10’s IMEI (for example, certain Verizon SIM cards). Please confirm compatibility with your carrier in advance.
• IoT SIM Card Recommended: For better stability and optimized data communication, a data-only IoT SIM card is recommended. Voice calls and SMS are not supported. 

9.5.1.4 Enable Mobile Network:

Insert the SIM eject tool into the SIM tray hole and press gently to release the tray.

Place the 4G Nano SIM card into the tray.

Follow the orientation markings on the device to insert the SIM card correctly.

Note: Incorrect insertion of the SIM card may cause permanent damage to the device.

Such damage is not covered under warranty.

To enable mobile data:

• Quick Access: Swipe down to open the control panel, then long-press the mobile data icon.
• Menu Path: Go to Settings App > Network Settings (antenna icon) > Mobile Network, then switch on Mobile Data. Turn on Data Roaming only if needed.

9.5.2 Cloud SIM

9.5.2.1 Cloud SIM Service Disclaimer

Important Note (Pre-Use Statement)

The [GlocalMe App] and its associated Cloud SIM services are independently provided by [Shenzhen uCloudlink Network Technology Co., Ltd.]

ATOTO is not involved in the development, operation, or any commercial activities related to this application or its underlying services.

Responsibility Disclaimer:

• All fees, data plans, service agreements, and service quality matters are solely managed and provided by [Shenzhen uCloudlink Network Technology Co., Ltd.]
• The ATOTO brand and the manufacturer of the P10 device manufacturer shall bear no responsibility for these services.

App Installation & Compatibility:

• The P10 only pre-installs the GlocalMe App and provides technical compatibility support.
• Whether or not to use this service is entirely up to the user's discretion.

In Case of Issues:

If you encounter any of the following issues, please contact the GlocalMe App service provider directly:

• Functional abnormalities
• Subscription or package purchases
• Payment issues
• Service quality concerns

Legal & Ownership Clarification:

• All subscriptions, network connections, plan purchases, and terms of service are owned and governed solely by [Shenzhen uCloudlink Network Technology Co., Ltd.]
• There is no equity or business partnership between this company and the ATOTO brand, or the developers or manufacturers of the P10 device.

Final Reminder:

Use of this service is completely voluntary.

ATOTO serves only as a technical platform provider and shall not be held liable—either directly or indirectly—for:

• Connection failures
• Disputes related to subscription or service
• Any data or privacy issues arising from use of this third-party service

The P10 device comes with an embedded Cloud SIM, providing a more convenient mobile network connection option.

9.5.2.2 About Cloud SIM:

Cloud SIM is a virtual SIM card solution based on cloud computing technology. It replicates the functions of a traditional physical SIM card through software-defined means, migrating the functions of the traditional SIM card (such as carrier authentication and data storage) to the cloud, and managing it remotely via encrypted protocols. The core features are as follows:

1. No physical SIM Card Required: It eliminates the need for installation and replacement of traditional SIM cards, simplifying the user experience.
2. Supports Multiple Countries: The Cloud SIM supports network usage in over 100 countries, making it ideal for international travel and cross-regional network connectivity without needing to change local SIM cards.
3. Supports Multiple Carriers: The Cloud SIM intelligently selects the optimal network carrier based on the user's location and available network conditions, ensuring a stable network connection experience.

Required App Software:

1. For the P10 device:

The P10 comes with the Cloud SIM app pre-installed, or you can download it via the FindApps app on the P10.

1. For mobile phones:

Please search for and download the “GlocalMe IOT” app from Google Play or the App Store.

9.5.2.3 How to Use Cloud SIM

Please refer to the instructions below to learn how to use the Cloud SIM card.

Note: The screenshots here are for reference only; please refer to the actual device.

Operation Steps:

1. Power on the P10 to Display the QR Code

When using the P10 for the first time, a Cloud SIM activation prompt along with a corresponding QR code will automatically appear on the home screen once the P10 is powered on.

Note: For subsequent Cloud SIM network usage, you can open the Cloud SIM app to access the interface and retrieve the QR code.

1. Register an Account

Use your smartphone to scan the QR code displayed in the popup window. This will direct you to the corresponding webpage. On the page, select your country, enter your email address and password, check the box for "Agree to the User Agreement and Privacy Policy," and then click the "Sign up or log in" button to complete the device-to-account binding process.

1. Purchase a Data Service Package (Use the Coupon to Buy a 30-Day 10GB Plan)

On your smartphone, tap the "Sure" button in the popup window, or go to the coupon page and use the new user coupon to complete the purchase of the specified data service package.

(Note: The screenshots here are for reference only; please refer to the actual device.)

1. Activate the Cloud SIM

On the P10, tap the "Go to activate the Cloud SIM" button in the popup window to open the corresponding interface. Then, tap the "Activate Cloud SIM" button on that screen, or open the Cloud SIM app and tap "Activate Cloud SIM".

1. After activating the Cloud SIM, open a website using the Chrome browser on the P10 to test whether the network connection is working properly.

9.5.2.4 How to Purchase Data

The Cloud SIM supports two methods for purchasing data packages: either through the Cloud SIM app on the P10, or via the GlocalMe IOT app on your smartphone.

Method 1: Purchase a data service package via the Cloud SIM App on the P10.

Operation Steps:

1. Open the Cloud SIM App .

Tap the Cloud SIM app to enter the interface. A QR code will then appear on the screen.

1. Log In to Your Account.

Use your phone to scan the QR code to open the login webpage.

On the webpage, select your country/region, enter your email address and password, agree to the User Agreement and Privacy Policy, and then tap "Sign up / Log in."

1. Purchase a Data Package

Once logged in, follow the on-screen instructions to select and purchase your desired data package.

1. Activate the Cloud SIM

On the P10, tap "Activate Cloud SIM" to enable the service and connect to the network.

1. Test the Network Connection

After activation, open Chrome on the P10 and visit any website to confirm that the network connection is working properly.

Method 2: Purchase a data service package via the GlocalMe IOT App on your mobile phone.

Operation Steps:

1. Download the GlocalMe IOT App

On your mobile phone, search for "GlocalMe IOT" in Google Play or the App Store, download and install it.

1. Open the Cloud SIM App on P10.

Tap the Cloud SIM app to enter the interface.

A Cloud SIM activation prompt and a QR code will appear on the screen.

Tap "Download the app to get more offers and features" to display the corresponding interface with the QR code.

1. Add the P10 to the GlocalMe IOT App

Open the GlocalMe IOT app on your phone, tap "Scan", and scan the QR code displayed on the P10 to complete device addition.

1. Purchase a Data Package

In the GlocalMe IOT app, tap the "Mall" button to access the data purchase screen. Select a Data Service Package and tap "Buy" to complete the payment

1. Activate the Cloud SIM on P10

After purchase, tap "Activate Cloud SIM" on the P10 to enable the service and start using the network.

1. Test the Network Connection

Open Chrome on the P10 and visit any website to confirm that the network connection is working properly.

Chapter 10 Apps

10.1 App Overview

The system includes several built-in apps that support various functions such as voice interaction, vehicle tracking, accessory control, and video recording. Notable examples include:

• DriveChat: An AI-based voice assistant that supports voice commands, online Q&A, and weather information.
• TrackHU: A GPS-based vehicle tracking app that supports viewing driving history and setting up geofences.
• FindApps: The official app management platform for downloading, installing, and updating supported applications.
• Widget: Offers a variety of widgets that can be placed on the P10 interface as shortcuts for quick access to frequently used functions and applications.
• Palette: Adjusts display color and widget transparency for personalized screen appearance.
• LumiAuto: Controls ATOTO ambient lighting accessories via the system’s Bluetooth connection. Only compatible with ATOTO lighting products.
• DVR: Records both front-view and in-cabin video. Supports Parking Monitoring and G-sensor collision wake-up to save emergency recordings.
• RCAM: Enables video display from wired backup cameras
• WRC: Provides real-time rear view for reversing and parking through a wireless camera system.
• Web Resources: A factory utility for scanning and uploading device hardware/software data to assist with after-sales service and product traceability.
• System Update: Keeps your P10 system up to date with feature additions and bug fixes.

10.2 DriveChat(AI Assistant)

DriveChat is an innovative application powered by SSHub and ChatGPT that enables voice-based conversations with various AI bots on your P10.

Overall Process:

Download SSHub on your phone → Create/Login to your account → Open DriveChat on the P10 → Use SSHub to scan the QR code shown in the DriveChat app to link the P10 to your account → Set Wake Words.

10.2.1 Operation Steps

Step 1: Download & Sign In to SSHub

1. Download the SSHub app from the App Store (iOS) or Google Play Store (Android).

1. Open SSHub, then sign in with your existing account or create a new one if you don’t have one. Make sure you are successfully signed in before proceeding.

Step 2: Download and Access DriveChat App (Link P10 to SSHub Account via QR Code Scan)

1. By default, the DriveChat app comes pre-installed on the P10. If it is not pre-installed, please download it via FindApps, the built-in app management tool on the P10.
2. On the P10, open the DriveChat app and tap GO TO LOGIN.
3. The DriveChat app interface will display a QR code.
4. On your smartphone, open the SSHub app, tap Scan Now, and scan the QR code displayed on the P10’s DriveChat interface to link your SSHub account with DriveChat.
5. After linking, go to Mine(bottom tab) → My Devices → [Select your P10] → Device Name → Edit device name(enter a name)→ Confirm to rename your device.

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

Step 3: Set Wake-Up Words

1. After logging in with the QR code, the first-time guidance screen will appear to help you get started with DriveChat.

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

1. Select your preferred language pack and tap Confirm to start the download.

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

1. Once the download is complete, a DriveChat bubble will appear on the screen. Tap Via Wake-up Word > Settings to configure your personalized wake-up word, then tap + New Wake-up Word to begin setup.

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

1. Enter your wake-up word and record it several times with the same voice. Normally, you need to tap Start four times to complete the recordings. When the status shows Ready, the wake-up word has been successfully saved and will appear in the Wake-up Word Settings list.

For best recognition accuracy, each user should record their own wake-up word using their own voice. Avoid using short or common words that may trigger the assistant unintentionally.

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

1. You can set one or more wake-up words to activate voice interaction.

After recording, the Voice Wake-Up function remains disabled by default.

To enable voice activation, turn on the switch next to your recorded wake-up word.

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

Once enabled, saying the wake-up word will activate DriveChat for voice commands and conversations.

Multiple wake-up words can be added if needed. For example, different users can record their own wake-up words for personalized recognition.

Note:

1. DriveChat supports manual activation by default, which can be done by tapping the DriveChat icon on the P10 screen or pressing the DriveChat button on the AutoNap Holder Battery.

If you wish to use voice activation, please turn on the switch next to your recorded wake-up word.

1. In high-speed driving or noisy environments (such as when windows are open), it is recommended to activate DriveChat using the button for more reliable performance.
2. The DriveChat (AI Voice Assistant) can process only one command or conversation at a time. Please wait for the current interaction to finish before starting the next one.

10.2.2 Left-Side Menu Overview

The DriveChat app includes a left-side menu with the following sections:

• General – Manage account information, language settings, and wake-up word settings.
• All Skills – Browse available voice commands, including boosted skills. When you speak a supported command, DriveChat will recognize it and perform the corresponding action.
• Feedback – Submit your questions or suggestions. Our team will review your feedback and respond as soon as possible.
• Smart Functions – Access guidance and instructions on how to use DriveChat features.
• About – View version information, Privacy Policy, and Terms of Use.

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

10.2.3 Configuring the Chatbot Settings

In the SSHub app, you can configure the chatbot for DriveChat as follows:

1. After tapping the DriveChat icon in SSHub, the main interface will appear.
2. Tap Chatbot in the bottom menu.
3. Select your preferred AI model (e.g., Adventure Story Time, Critical Thinker, etc.).

This allows you to engage with an intelligent assistant tailored to your needs, whether for entertainment, guidance, or decision-making support.

Note: Images and interface examples are for reference only. Please refer to the actual software interface and available functions on your device.

After selecting a chatbot, you can also tap “Chat” to start a conversation directly on your phone.

Note:

• Response time may vary based on network conditions.
• Both the DriveChat and SSHub apps are periodically updated; please refer to the latest version for current instructions.

10.3 TrackHU

(Built-in GPS Vehicle Tracking)

TrackHU is designed to streamline how you locate your car. It offers the following features:

• Real-time tracking on a map
• Alerts and geofence settings
• Access to analytics
• Historical data on speed and distance
• 24/7 vehicle security

Activate TrackHU by enabling GPS and network connectivity on your P10, then scan the QR code to access the TrackHU Manager for comprehensive tracking information.

Note:

• Ensure your P10’s GPS and network are enabled to receive notifications via email and to access tracking data in the TrackHU Manager APP or website.
• lf your P10 loses internet connectivity, the tracking data will be stored locally and automatically uploaded to the server once the connection is restored.
• The default tracking refresh rate is 45 seconds. Shorter refresh intervals are available through paid subscription options in the SSHub app.

10.3.1 Activate and Link TrackHU

The TrackHU app icon is hidden by default to protect your privacy.

To show or hide the app, open Settings and quickly tap the gear icon four times in a row. A pop-up message will appear confirming that the TrackHU app has been shown or hidden.

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

Follow the steps below to activate TrackHU and connect your P10 to the TrackHU Manager.

1. On the P10, open the TrackHU app.
2. Tap the ①(Power button) to enable TrackHU. You will see the network and GPS status at the left corner ②.

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

【AI图解：This image shows the TrackHU app interface. No.1 is the Power button, used to enable or disable TrackHU. No.2 indicates Network and GPS status, displayed in the lower-left corner. No.3 is the Support icon, used to submit suggestions or feedback.】

1. Tap the Support icon (③) if you would like to provide suggestions or feedback.
2. Scan the QR code using the SSHub app on your smartphone (after downloading it from the App Store or Google Play and signing in). The QR code will expire in 5 minutes and you can refresh the QR code by tapping the Refresh button or exiting the TrackHU and entering again.

1. On the SSHub app home screen, tap the map-style square tile to open the TrackHU Manager interface.

10.4 FindApps

FindApps is an exclusive app store designed specifically for our Android devices. We are dedicated to enriching your driving experience with a wide array of software options. Unlike the general offerings of the Google Play Store, FindApps ensures that all available applications are fully compatible with ATOTO P10.

10.4.1 How to Use FindApps

1. Go to Apps, tap FindApps.
2. On the App page, scroll through the list to find the app you want to install, then tap Install > Retrieve.

Note: The app list shown above is for reference only. Available apps may vary by version, region, or update cycle. Please refer to your device for the current list.

1. On the Manage page, scroll through the list to find the app you want to uninstall, manage, or update, and proceed with the desired action.

10.5 Widget

Widgets provide quick access to key information and frequently used functions directly on the P10 home screen.Immediate Information — Displays essential data such as time, weather, and media status at a glance.

• One-Touch Control — Offers instant access to commonly used functions and direct launch of applications.
• Flexible Placement — Users can add widgets by long-pressing and releasing the icon onto any available space on the home screen or secondary screens. Some icons are restricted to the bottom shortcut bar.
• Easy Removal — Long-pressing an existing widget will display a “Remove” area at the top of the screen. Drag the widget there to delete it.
• Personalized Layout — Widgets can be added, replaced, deleted, resized, or moved to suit user preferences and driving scenarios.

The image below shows the Widget App interface

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

10.6 Palette

Palette App is a pre-installed application designed for manually adjusting the color and brightness of the home screen interface and specific app interfaces, as well as the opacity of widgets on the home screen.

10.6.1 Customize Color and Brightness

The Palette App supports adjusting the color and brightness of the home screen interface and specific application interfaces. Users can customize the interface colors according to their personal preferences, allowing the home interface and specific app interfaces to better reflect individual aesthetics and usage habits. Specifically, it includes the following:

1. Multiple Color Options

Offers 18 primary color choices, combined with brightness adjustment, allowing users to create their preferred interface colors.

2. Multi-Interface Color & Brightness Customization

Supports primary color and brightness adjustment for:

1. Radio App interface
2. Bluetooth Phone App interface
3. EQ App interface
4. Settings App interface
5. Home Screen interface
6. All 5 aforementioned app interfaces
7. Widget Opacity:Slide to adjust the opacity of widgets on the home screen interface

【AI图解：This image shows the Palette app interface. No.1 is a radio signal icon, representing the Radio App interface. No.2 is a phone handset icon, representing the Bluetooth Phone App interface. No.3 is a slider control icon, representing the EQ App interface. No.4 is a gear icon, representing the Settings App interface. No.5 is a house icon, representing the Home Screen interface. No.6 is the text label “ALL”, representing all five interfaces. No.7 is a horizontal slider bar, representing Widget Opacity adjustment.】

Operation Steps

Path: Home Screen > App Drawer > Palette App

1. Tap to open the Palette App.
2. In the Palette, tap to select a color and adjust its brightness. The P10 will show a real-time preview of the color and brightness.
3. Tap the application icon to apply the selected color and adjusted brightness to the target application area.
4. Tap the "Apply" button at the bottom to complete the setting.
5. Restore default settings (optional). If you are not satisfied with the adjustment results, you can tap the "Default" button to revert everything to the initial state with one click.

10.6.2 Customize Widget Opacity

The widget opacity feature allows adjusting the opacity of widgets (such as date & time, weather, etc.) on the home screen interface. This feature enhances visual personalization and practicality.

Operation Steps

Path: Home Screen > App Drawer > Palette App

1. Tap to open the Palette App.
2. Adjust the widget opacity using the widget opacity slider.
3. After adjusting, tap the App Drawer icon to return to the home screen interface, where you can see the effects of the adjustment. Adjustment is complete.

10.6.3 Interface Controls

Radio App Button: Tap to apply your preset Radio App interface color and brightness.

Bluetooth Phone App Button: Tap to apply your preset Bluetooth Phone App interface color and brightness.

EQ App Button: Tap to apply your preset EQ App interface color and brightness.

Settings App Button: Tap to apply your preset Settings App interface color and brightness.

Home Screen Button: Tap to apply your preset Home Screen interface colors and brightness.

All Button: Tap to apply all your preset interface colors and brightness settings simultaneously.

Widget Opacity Slider Bar: Slide to adjust the opacity of widgets on the home screen interface.

10.7 LumiAuto

The LumiAuto app provides multi-dimensional control of compatible ATOTO ambient lighting accessories (sold separately), allowing you to personalize in-cabin lighting with different modes, colors, and brightness settings. The app can be accessed directly on the P10 or installed on your smartphone for remote adjustments.

10.7.1 Features

1. Lighting Modes

• Solid Color Mode: Full RGB spectrum for seamless color selection.
• Multi-Color Mode: Dynamic presets (e.g., breathing, gradient, strobe).

1. Customization & Synchronization

• Adjustable Light Brightness: Independently adjust front and rear brightness.
• Music Sync: Lights pulse and shift with the audio spectrum (supports Bluetooth/local playback).
• Scene-Based Ambience Customization: Tailor in-cabin lighting to different occasions, creating a personalized ambiance (e.g., relaxed evenings, energetic road trips).

1. Control Options

• Via P10: Access from the home screen by opening the LumiAuto app.
• Via Smartphone App: Download the LumiAuto app to make remote adjustments and save lighting profiles.

Requirements

• Accessory: Compatible ATOTO ambient lighting kits (sold separately).
• Compatibility: The P10 supports only ATOTO’s official lighting accessories and is not compatible with third-party products.

10.7.2 Software Availability

• On P10: LumiAuto is pre-installed.
• On Smartphone: Download the LumiAuto app from the app store to enable remote control.

Note: The software is optimized for Android devices. An iOS version is under development.

10.7.3 Pairing the Ambient Lights

Tap "Search for Devices" to begin scanning. Tap "Search for Devices" to begin scanning. When your Footwell Light’s device name appears, tap "Connect" to pair it with the app.

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

Once connected, you can use the LumiAuto app to control lighting color, mode, brightness, and other effects.

10.8 Audio Output

This device supports multiple audio output modes. Users can choose how the P10's audio is played—either through the car stereo or the device itself. There are two ways to access the audio output settings:

– via the “Audio Out” app, or

– by tapping the audio output icon on the home screen.

Tapping a mode icon will immediately activate the corresponding output mode.

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

【AI图解：This image shows the audio output mode selection interface. The icons are arranged from left to right. ① is a radio antenna icon, representing FM Transmission Mode. ② is a cable plug icon, representing AUX Output Mode. ③ is a speaker with sound waves icon, representing Speaker Output Mode. ④ is a Bluetooth symbol with an audio device icon, representing Bluetooth Transmission Mode. ⑤ is a CarPlay/Android Auto icon with navigation symbol, representing CP/AA Audio Output Mode. ⑥ is a phone handset with speaker waves icon, representing Bluetooth Call Audio Output Mode.】

10.8.1 FM Transmission Mode（①）

The P10 can transmit audio to the car stereo via FM frequency. To set up:

1. Tap the (Radio Antenna Icon) to enter FM transmission mode.
2. Select an unused FM frequency (e.g., 86.7 MHz).
3. Tune your P10 to the same frequency (e.g., 86.7 MHz).

Once set, the audio from the P10 will play through your car stereo.

Tip: Choose a frequency without local FM broadcasts to avoid interference and ensure better audio quality.

10.8.2 AUX Output Mode（②）

Connect P10 to the car stereo with an AUX cable (AUX OUT on the back of P10 or on the car charger → AUX IN on the car stereo) to play audio through the vehicle speakers.

To use this mode:

1. Tap the (Cable Icon) to enter AUX output mode.
2. Connect one end of the AUX cable to the AUX OUT port on the back of P10 or on the car charger.
3. Connect the other end to the car stereo’s AUX IN port.
4. Switch the car stereo to AUX input mode (you may need to launch the AUX IN app or manually select the input, depending on your stereo).

10.8.3 Speaker Output Mode（③）

Tap the (Speaker Icon) to enter Device Output Mode. In this mode, audio is played through the P10’s built-in speaker.

10.8.4 Bluetooth Transmission Mode（④）

Tap the (Bluetooth Audio Icon) to enter Bluetooth Transmission Mode.

In this mode, P10 connects to the car stereo using the system Bluetooth. Once paired, audio from P10—such as navigation prompts, music, and videos—will be wirelessly transmitted to the car stereo and played through the vehicle’s speakers.

10.8.5 CP/AA Audio Output Mode（⑤）

When the phone is connected to P10 via CarPlay/Android Auto, tap the (CP/AA Icon) to enter this mode. After enabling “Audio/Video Separation” in the lower-left corner, the display remains on P10 while the audio is routed to the phone. At this point, CP/AA will reconnect once, which is normal.

To play the sound through the vehicle’s speakers, pair the phone with the car stereo via Bluetooth. On some vehicles, it may be necessary to manually select “BT Music” or “Bluetooth Audio” mode on the head unit to receive and play the sound.

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

10.8.6 Bluetooth Call Audio Output Mode（⑥）

By default, Bluetooth call audio is played through the device’s built-in speaker.

When “Follow Source” is selected, call audio follows the currently chosen audio output mode. However, in Bluetooth Transmission Mode, call audio always plays through the device speaker.

When “Phone” is selected, call audio is always routed to the phone.

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

10.9 D-DVR

The DVR function requires a microSD card for video recording, supporting up to 256GB.

When a new card is inserted for the first time, a prompt will appear suggesting that you format the card to ensure compatibility and proper recording.

When a collision is detected during driving or parking surveillance, the system automatically records an emergency video of approximately 30 seconds.

Normal videos are recorded in loop mode and will be automatically overwritten when the storage becomes full. Locked videos are preserved by default and will not be deleted automatically.

If the storage becomes full and only locked videos remain, the system will prompt you to format the card instead of overwriting existing files.

10.9.1 D-DVR Interface

Tap D-DVR to enter the interface.

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

【AI图解：This image shows the DVR interface control icons arranged from left to right. No.1 is a red circle icon, representing the Record button. No.2 is a three-line menu icon, representing the Menu. No.3 is a camera icon, representing Photo Capture. No.4 is a microphone with a slash icon, representing Mute. No.5 is a lock icon, representing Video Lock/Unlock. No.6 is a gear icon, representing Settings.】

No. : 1

Name: Record button

Function: Tap the Record button to start or stop recording.

No. : 2

Name: Menu

Function: To view and manage recorded videos and photos, lock/unlock files, delete files, or browse files by calendar.

No. : 3

Name: Photo Capture

Function: To capture images. Photo capture may not be available during certain recording states.

No. : 4

Name: Mute

Function: Tap once to mute. Tap again to restore sound.

No. : 5

Name: Video Lock/Unlock

Function: Tap to switch to the Lock icon and start recording.

Tap the Lock icon again to unlock.

To stop recording, tap the Record button.

No. : 6

Name: Settings

Function: Configure G-Sensor sensitivity, Parking monitor, Speed unit, Record loop time, and other settings.

Note: In the DVR interface, a single tap anywhere on the screen will show or hide the bottom options bar.A double tap on the screen will switch to the split-screen mode, displaying both the front and in-car views.

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

10.9.2 DVR Menu

Tap the menu button to access options for editing videos or photos.

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

【AI图解：This image shows the file management interface in the DVR menu. At the top selection bar, No.1 is the letter “F” tab, representing Front Camera files. No.2 is the letter “R” tab, representing Cabin Camera files. No.3 is a pencil/edit icon, representing Edit. No.4 is a calendar icon, representing Calendar view. On the left category panel, Category A is a video camera icon, representing Recorded Videos. Category B is an image/photo icon, representing Gallery. Category C is a folder with a lock icon, representing Locked Videos.】

No. : 1

Name: Front Camera

Description: Videos or photos captured by the front camera.

No. : 2

Name: Cabin Camera

Description: Videos or photos captured by the in-vehicle (Cabin) camera.

No. : 3

Name: Edit

Description: Delete, lock, or unlock videos or photos..

No. : 4

Name: Calendar

Description: Browse recordings by date. Dates with a red dot indicate available recordings.

Category：A

Name：Recorded Videos

Description: All video recordings.

Category：B

Name：Gallery

Description: All captured photos.

Category：C

Name：Locked Videos

Description: Emergency videos saved automatically or manually.

[ Edit Mode ]

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

In Edit mode, you can manage video files one by one, select multiple files, or apply actions to all files. Available operations include Lock, Unlock, and Delete. Regular videos can be deleted directly, while locked videos cannot be deleted. To delete a locked video, please unlock it first.

[ Calendar View Mode ]

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

In the calendar interface, a red dot indicates that the DVR has recorded footage on that day.

10.9.3 DVR Settings

Tap the settings (gear icon) to configure options such as G-Sensor sensitivity, parking monitor, and recording loop.

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

G-sensor

Automatically triggers an emergency recording and saves the footage when a collision or strong vibration is detected, preventing important clips from being overwritten.

Sensitivity can be set to Low / Middle / High. This feature must be enabled to take effect.

Parking Monitor

When the vehicle is parked and powered off, the device will automatically record if unusual vibration or impact is detected, capturing important evidence while you are away.

This function works only when Parking Monitor is turned ON, the G-Sensor sensitivity is set to any active level (not Off), and the AutoNap Holder Battery has remaining power.

Pixel

This setting allows you to choose from three available resolutions: 480p, 720p, or 1080p, based on your needs.

Loop time

Video is saved in segments of 1, 3, or 5 minutes.

Uint (Speed unit)

Set the speed display unit to kilometers per hour (KM/H) or miles per hour (MPH).

Format Storage Device

Clears the SD card to prepare for new DVR recordings.

10.9.4 Parking Monito & Remote LiveView

The P10 supports Parking Monitor and Remote LiveView. It also supports Remote Video Calling while driving. A video call can only be connected after the incoming call is accepted on the P10.

Note:

1. Parking Monitor and Remote LiveView require the P10 to have an active network connection and a TF (microSD) card inserted.
2. To receive Parking Monitor alerts/notifications, turn Parking Monitor to ON in DVR Settings, and set G-SENSOR sensitivity to any level except OFF.
3. Remote Video Calling is one-way video—the SSHub user can view the P10 camera image (front road view or in-cabin view, e.g., pets or a baby), but the P10 does not display the caller’s video to help reduce distraction while driving.

Before You Start (App Setup)

To use remote features, complete the setup below:

1. Download and install the SSHub app from the App Store (iOS) or Google Play (Android).
2. Open SSHub, then sign in with your existing account (or create a new account if needed). Make sure you are signed in successfully before proceeding.
3. Bind the P10 device to your account. (Open DriveChat on the P10 and scan the QR code displayed in the app to bind the device.)

Remote LiveView (SSHub)

• After binding your P10 in the SSHub app, open SSHub and tap [ Camera ]to start Remote LiveView.
• Only one camera feed can be viewed at a time. To switch to another camera, tap Multi-Camera View in the bottom-right corner.
• Tap “Tap to connect”, then wait a moment for the live view to load.

Parking Monitor Notifications (SSHub)

• Open SSHub, then tap the bell icon in the top-right corner to view Notifications.
• If Parking Monitor detects an impact, an alert with video and photos will be sent to your SSHub.
• For timely alerts, please keep SSHub notifications enabled on your phone.

Note: To receive Parking Monitor alerts/notifications, turn Parking Monitor to ON in DVR Settings, and set G-SENSOR sensitivity to any level except OFF.

10.9.5 Golden Hour Alert Service

(Serious Collision Alert Notifications )

If a serious collision occurs while driving, the P10 will automatically capture key images and upload them to the cloud. It then sends your location details and captured images to help deliver critical information quickly, even if you are unable to operate the device manually.

Notifications:

• SSHub push: A Traffic Collision alert will be delivered in SSHub (with images).
• SMS: A text message containing location details and images (or an image link, depending on delivery) will be sent to your pre-set emergency contacts.

Setting Up Emergency Contacts (SSHub)

You can set emergency contacts for Serious Collision Alert Notifications in the SSHub app.

Tip: The first time you use this feature, an on-screen guide may appear.

You can also follow the steps below at any time:

1. Open SSHub on your phone.
2. Tap Camera to enter the camera screen.
3. Tap the gear icon in the top-right corner to open Settings.
4. Under Feature Settings, tap Critical Event Detection.
5. Turn the Notification switch ON.
6. Tap “+ Add emergency contact”.
7. Enter the phone number of your emergency contact.
8. When finished, tap Save in the top-right corner.

Service & Fees: SMS notifications may incur carrier or messaging charges. Cloud-based features (e.g., Parking Monitor uploads, Remote LiveView, and Remote Video Calling) may require a paid plan. Availability and pricing may vary by region and are subject to change—please refer to the SSHub app for the latest details.

Note: Video and photo retention follows the settings and rules in the SSHub app. The default retention period (for example, up to 7 days) may change; please refer to the latest information shown in SSHub.

10.10 RCAM

The RCAM function provides a real-time rear view to help eliminate blind spots and improve safety during parking and reversing maneuvers.

Required Accessory:

The RCAM function displays video from a wired backup camera in real time. It requires connection via the 2.5mm External Camera Input on the back of the P10. To enable this function, connect the ATOTO AC-P106C25 Rear Camera (sold separately). The P10 is compatible with supported external cameras only.

Note: The system is not compatible with third-party cameras.

10.11 WRC

The WRC App is a pre-installed wireless rear camera system application that receives and displays real-time video, assisting drivers during reversing and parking maneuvers.

The camera can be mounted on either the front license plate or the rear license plate. The system consists of a wireless camera, a receiver, and the WRC App. Video signals are transmitted wirelessly, eliminating the need for cables. The app displays both reverse camera footage and Live Rear View video directly on the P10’s screen, simplifying installation and improving operational flexibility.

Required Accessory

The WRC function requires the WR2-12HDLR Wireless Backup Camera (sold separately). Please note that future models or updated versions may be released—refer to the latest official documentation.

Display Modes

1. Power-Saving Mode: Used for standard reversing footage; video is displayed temporarily and automatically enters sleep mode after 2 minutes (auto-exits the WRC app).
2. Mirror (Live Rear View) Mode: Continuously displays camera footage, allowing drivers to monitor the area behind the vehicle at any time.

Enter the WRC Interface( Multiple Wake-Up Methods):

• Press the receiver’s WAKE/PAIR button once to wake and enter Power-Saving View. Double-press the button within the WRC interface to switch between Power-Saving and Always-On (Mirror) Mode.
• Use the SmartRemote: press once to open or close the WRC app (Bluetooth pairing required via the system Bluetooth; device name: SmartRemote).

Note: Do not press the SmartRemote repeatedly or too quickly.

• Use voice commands via the DriveChat App (requires DriveChat login and a recorded wake word).
• When already in the WRC interface, tap the screen to wake the display.

Image Adjustments: Flip image vertically, mirror horizontally, adjust parking guide lines, and enable Wide Dynamic Range (WDR) for enhanced visibility.

Status Monitoring: Shows wireless signal strength and camera battery level, with alerts for weak signals or connection issue.

Compatibility: Supports only ATOTO’s approved wireless camera system; third-party cameras are not supported.

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

Note: For detailed instructions, please refer to the official user manual of the wireless camera system (e.g., WR2-12HDLR User Manual). Model names and numbers may vary, so please ensure you are referring to the correct manual for your specific camera system.

For more detailed information about the wireless camera system, please scan the QR code.

10.12 CarIoTHub

CarIoTHub is ATOTO’s in-vehicle IoT control platform. It is designed to centrally manage compatible Bluetooth Low Energy (BLE) devices, such as ambient lighting, OBD II diagnostic scanner, and interactive LED displays.

CarIoTHub supports only specific Bluetooth Low Energy (BLE) devices that are officially compatible with ATOTO and use supported communication protocols. It does not support all standard Bluetooth devices or generic Bluetooth accessories.

Supported devices can be controlled directly from the vehicle display through CarIoTHub. When used together with DriveChat, voice control and automation functions may be available for supported devices.

Device Connection Example

(ATOTO AI Interactive LED Sign, Sold Separately — Interface for Reference Only)

The following steps are provided as an example. The actual interface and device options may vary depending on your device. Please refer to your specific device for accurate operation.

1. Open the CarIoTHub app.

2. Tap the “+” icon in the top-right corner to add a BLE device.

3. Select the corresponding device type icon.

1. Make sure the device is powered on. Its Bluetooth name will appear in the list.

Note: If the device does not appear in the list, please check its power supply and restart the device, then try again.

5. Tap the device name to add it. A pairing code will appear on the interactive display.

Enter the pairing code to complete the connection.

1. Tap the device icon to access device management and control settings.

1. Remove a Device

Press and hold the device icon until the Delete option appears, then tap to remove the device.

10.13 Maps

This app serves only as a customizable shortcut for quickly launching a preferred application.

When opened for the first time, the Maps shortcut enters the Default Navigation interface, where you can choose an app from the available list.

After the initial setup, tapping Maps will directly open the selected application.

To change the assigned application, open the Settings app, tap the gear icon, select Default Navigation, and choose your preferred application.

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

(Note: Only certain applications support this quick access feature.)

10.14 TPMS

The TPMS (Tire Pressure Monitoring System) continuously monitors tire pressure and temperature in real time. When abnormalities are detected (e.g., overinflation, underinflation, or abnormal temperature rise), the system immediately alerts the driver to enhance driving safety and prevent hazardous incidents such as tire blowouts.

Required Accessory

To use the TPMS App, the ATOTO AC-UTP1 TPMS (sold separately) is required. (Note: The P10 is not compatible with third-party accessories.)

For detailed setup and usage instructions, scan the QR code to access the AC-UTP1 User Manual.

10.15 Torque

The Torque App is a third-party automotive diagnostic application designed for the Android platform, specifically used with OBD II Bluetooth diagnostic interface devices. By installing the Torque App on the P10, users can access real-time data from the vehicle's ECU (Engine Control Unit) to monitor vehicle status, perform fault diagnostics, and analyze performance.

Required Accessory

To use the Torque App, the ATOTO AC-4450 OBD II Diagnostic (sold separately) is required. (Note: The P10 is not compatible with third-party accessories.)

For detailed setup and usage instructions, scan the QR code to access the AC-4450 User Manual.

10.16 Web Resources

The Web Resources App is a built-in web portal application on the P10, designed to provide users with quick access to P10-related information and resources. Key features include:

• Effortless download of apps and firmware updates
• Viewing all included package items
• Guided installation and connection tutorials via video
• Instructions in 15 available languages
• One-click warranty application

The app accesses content through the P10’s network connection (Wi-Fi, mobile hotspot, etc.), allowing users to quickly obtain technical support, update resources, or user guides, thereby enhancing convenience and efficiency.

Operation Steps

Navigation Path: Home Screen > App Drawer > Web Resources App

1. Launch the Web Resources App by tapping its icon.
2. Scan the displayed QR code with your smartphone to learn more.

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

10.17 Feedback

The Feedback App is a pre-installed user feedback tool (or can be downloaded from FindApps) on the P10, designed to provide a convenient channel for users to submit issues, suggestions, or feature improvement requests encountered during product use. Through this app, users can directly send feedback to the technical support team, helping the manufacturer continuously improve product performance and user experience.

Key Features:

1. Issue Reporting: Users can select the type of issue, enter a detailed description, and attach relevant screenshots to help the technical team quickly identify and resolve problems.
2. Suggestion Channel: Supports user-submitted suggestions for improvements to system features, interface, or user experience.
3. System Log Upload: With user consent, the system can automatically package and upload operating logs to assist with issue tracking and technical analysis, speeding up resolution.
4. Contact Information: Users can provide an email address to receive follow-up responses and technical support.

Operation Steps

Path: Home Screen > App Drawer > Feedback App

Step 1: Launch the Feedback App

Tap the Feedback App icon to open the feedback interface.

Step 2: Fill in Feedback Details

Complete the following fields in the feedback interface:

Feedback Log: Tap to upload system logs to help us identify and resolve issues more efficiently.

Issue Description: Enter a detailed description of the issue or suggestion, and tap "Add Photos" to upload relevant screenshots.

Step 3: Enter Contact Information

Provide a valid email address so the technical support team can contact you if needed.

Step 4: Submit Feedback

After confirming all information is accurate, tap the "SUBMIT FEEDBACK" Button. The system will automatically send your feedback to the technical support team.

Important Notes:

1. Please provide as much detail and as many relevant screenshots as possible to help the support team respond quickly and accurately.
2. The Feedback App is for feedback collection only and does not provide real-time customer service. For immediate assistance, please contact the ATOTO Customer Service team.

10.18 EIOTCLUB

The EIOTCLUB App is a preinstalled application on the P10, designed for on-device management of the EIOTCLUB 4G Nano SIM card—view data usage and plan status, purchase or top up data plans, and manage account details (bind your email address, view order history, obtain receipts). A 4G Nano SIM card provided by the third-party service provider may be included in the P10 package. Use of this SIM card and its related services is optional and subject to the terms of the service provider.

Note: The EIOTCLUB App and related SIM services are independently operated by EIOTCLUB TECHNOLOGY CO., LIMITED. ATOTO provides only application compatibility support on the P10 device.

1. Function Overview

• View data usage, remaining balance, validity period, and current plan status.
• Purchase or top up data plans directly on the P10.
• Manage account information (bind email, view order history, obtain receipts/invoices).

Note: The UI and available features may vary by app version, region, and account permissions. Refer to what appears on your device.

2. Requirements and Preconditions

• P10 with a cellular module (variant that supports a physical 4G data nano-SIM).
• EIOTCLUB 4G Nano SIM inserted and active.
• Vehicle located in a mobile network coverage area with mobile data enabled.
• Set the P10’s system time and time zone correctly to ensure accurate billing and plan activation.

Note: Network availability and data speed depend on carrier coverage and local network conditions.

Operation Steps

Navigation Path: Home Screen > App Drawer > EIOTCLUB

First-Time Use and Activation

1. Before using the EIOTCLUB Data SIM Card for the first time, please read the user manual carefully to ensure proper use.
2. Insert the SIM card and power on. Wait for the system to recognize it (the status bar should show a mobile network icon with signal bars).
3. Tap to open the EIOTCLUB app. On the home page, view data usage, first-time top-up offers, and standard top-up options. (Note: Screenshots here are for reference only; please refer to the actual device.)

1. Tap the first-time top-up offer. In the pop-up, bind your email and tap “OK” to proceed to the purchase page.

1. On the purchase page, tap Buy and choose your payment method. Before you confirm payment, a reminder about the auto-renewal feature will appear.

1. Enter your bank card details to complete the payment.

1. Payment Success.

1. View data usage, remaining balance, validity period, and current plan status.

Common Operations

• Usage & Orders: Check remaining data, expiry date, order history, and receipts/invoices.
• Account Management: Change or verify the bound email; view the ICCID (SIM card number), etc.

Usage & Compliance Recommendations

• Driving Safety: Perform top-ups, settings, and checks only when parked and it is safe to do so.
• Privacy & Billing: Bind a frequently used email and keep order records and receipts.
• Region & Roaming: Availability and rates depend on the plan and region; confirm coverage and rates before cross-border use.
• Support: If issues occur, use the in-app Support or official channels.

10.19 Files

The P10 Files App allows you to efficiently manage files stored locally or on external devices such as USB drives (USB-C or USB-A via adapter). You can browse, categorize, copy, and delete files with ease.

Managing Local Files :

1. Tap the Files App icon to open the interface.
2. Browse, categorize, copy, or delete files stored on the P10.

Managing Files on USB/USB-C Devices:

1. Insert your USB or USB-C drive into the P10's rear port.
2. Open the Files App.
3. Tap the USB drive icon (usually located at the bottom of the left panel) to access its contents.
4. Browse, categorize, copy, or delete files as needed.
5. Tap the Eject (triangle-over-line) icon next to the USB drive icon to safely remove it, then unplug it.

Transferring Files Between P10 and USB/USB-C Drives

Note: The following steps demonstrate copying or moving files from the P10 to a USB/USB-C drive.

The same steps apply when transferring files from a USB/USB-C drive to the P10; you only need to switch the selection order between the P10 and the USB/USB-C drive.

1. Insert your USB or USB-C drive into the P10’s rear port.
2. Open the Files App on the P10.
3. Locate the file(s) you want to copy or move on either the P10. Long-press the file(s) to select them (a blue checkmark will appear to indicate selection).

1. Tap the More Options icon (three vertical dots, ⋮) in the top-right corner and select Copy to... or Move to...

1. If the target location is already displayed (for example, Downloads), tap Copy or Move at the bottom-left.

1. If you want to select a different location, tap the Menu icon (three horizontal lines, ☰) at the top-left, navigate to the desired folder (e.g., USB2), and then tap Copy or Move to complete the transfer. (If you do not want to copy or move the file, tap Cancel.)

1. After the operation, view the transferred files in the destination folder and safely remove the USB/USB-C drive by tapping the Eject icon (triangle over a horizontal line, ⏏) next to the drive name, then unplug the drive.

10.20 Picture

The Picture App is a pre-installed image viewing tool on the P10. It allows users to view image files from USB/USB-C drives or internal storage. Users can browse photos in single-image or slideshow mode, set images as the home screen wallpaper, and rotate images.

Key Features:

1. Supports multiple image formats (JPG, PNG, BMP, etc.)
2. Automatically scans and reads image files from internal and external storage
3. Folder-based browsing and categorized display
4. Single-image viewing and slideshow playback
5. Zoom in/out and rotate images
6. Set images as wallpaper

Playback Controls

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

【AI图解：This image shows the Picture app viewing interface. Along the bottom toolbar from left to right: No.1 is a picture icon, representing Set as Wallpaper; No.2 is a left arrow icon, representing Previous image; No.3 is a play/pause icon, representing Slideshow playback control; No.4 is a right arrow icon, representing Next image; No.5 is a menu/list icon, representing Menu. At the upper-right corner, No.6 is a circular rotate icon, representing Rotate 90° clockwise. At the upper-left corner, No.7 is a back arrow icon, representing Exit App.】

1. Set as Wallpaper (Picture icon): Sets the currently displayed image as the home screen wallpaper.
2. Previous Track: Navigate to the previous image in the album.
3. Play / Pause: Start or pause the slideshow playback.
4. Next Track : Navigate to the next image in the album.
5. Menu: Manage internal or external storage, access Album Rotation, and switch storage sources.
6. Rotate: Rotate the current image 90° clockwise with a single tap.
7. Exit App (Back icon, top-left corner): Exit the Picture Player app.

Operation Steps:

Insert Storage Device

Insert a USB/USB-C drive containing image files into the rear port of the P10. The system will automatically detect and read the image files.

Launch Picture App

Navigate to Home Screen > App Drawer > Picture App. Tap to open the interface.

Select Playback Source

Tap the Menu icon at the bottom-right corner to switch between internal storage and external storage (USB/USB-C).

Select Images for Album Rotation

Tap the checkmark icon (√) at the top-right of an image to add it to the Album Rotation.

Note: Simply tapping an image in internal or external storage only opens it for viewing; only tapping the top-right √ adds it to Album Rotation.

Slideshow Playback

Tap any image in Album Rotation to start automatic slideshow playback.

Slideshow images can be displayed on the home screen via the Widget App. To do this, navigate to Widget App > Pictures, select the desired card display size, then long-press and drag it to the preferred position on the home screen.

The slideshow interval is shown at the top-right corner of the album (e.g., “3s”). Tap the interval display to cycle through the available options: 3, 5, 7, or 10 seconds.

Note: Some preset themes already include a slideshow album on the home screen by default.

10.21 Music

The Music Player App is a pre-installed local music playback application in the P10. It supports playing music files from USB drives or local storage. Optimized for the P10’s large display screen and touch operation, it supports a wide range of audio formats and flexible playback controls, enhancing the in-car entertainment experience. Key features include:

(1) Supports multiple audio formats (e.g., MP3, WMA, FLAC, APE, WAV)

(2) Automatically scans music files from external storage devices

(3) Provides folder browsing and categorized display.

(4) Supports playback modes such as sequential, shuffle, and single-track loop

(5) Supports lyrics display and album cover art (depending on file metadata)

(6) Supports background playback

Operation Steps

Step 1: Insert a Storage Device

Insert a USB drive containing audio files into the rear port of the P10. The system will automatically scan and detect the music files.

Step 2: Launch the Music APP

Navigate to the Home Screen > App Drawer > Music App. Tap to launch the Music App and open the corresponding interface.

Step 3: Select a Playback Source and Music File to Play

In the interface, select the corresponding storage device (e.g., “USB2,” “Local Storage”). Browse folders or categorized lists and tap any song to start playback.

Step 4: Playback Controls

In the music playback interface, tap the screen to display playback controls.

• To play/pause, tap ▶or⏸ button to play or pause the current song.

• To switch songs, tap Previous Track or Next Track button to switch to the previous or next song.

• To change the playback mode, tap the “Playback Mode” button to switch between sequential, shuffle, or single-track loop modes.

• To adjust the song playback progress, drag the progress bar to fast-forward or rewind the current song.

• To search for a music file, touch the “Search” Button, then enter the music file name using the on-screen keyboard and tap search.

10.22 Video

The Video Player App is a pre-installed local video playback application in the P10. It supports playing video files from USB drives or local storage. Optimized for the P10’s large display screen and touch operation, it supports multiple video formats and high-definition playback, meeting in-car entertainment needs while parked or resting. Key features include:

(1)Supports multiple video formats: MP4, AVI, MKV, MOV, 3GP, FLV, etc.

(2)Automatically scans and detects video files on external devices.

(3)Provides folder browsing and categorized display.

(4)Offers playback-mode switching: single-video loop / play-all videos.

(5)Allows full-screen / windowed playback mode switching.

(6)Remembers playback position (resume from last point).

(7)Includes basic controls such as fast-forward/rewind, pause/play, and progress slider.

(8)Supports subtitle loading (e.g., .srt) and cover-art recognition.

Operation Steps

Step 1: Insert a Storage Device

Insert a USB drive containing video files into P10, the system will automatically detect and load the media content.

Step 2: Launch the Video APP

Navigate to Home Screen > App Drawer > Video App. Tap to launch the Video App and open the corresponding interface.

Step 3: Select Source and Video File to Play

In the interface, choose the desired storage location (e.g., “USB2,” or “Local Storage”), browse the folders, and tap any video file to start playback.

Step 4: Playback Controls

In the video playback interface, tap the screen to display playback controls.

• Play/Pause: Tap ▶or⏸ button to play or pause the current video.

• Switch Videos: Tap Previous Track or Next Track button to switch to the previous or next video.

• Full-screen/Window Mode: Tap the “Full-Screen” or “Window” Button to toggle display modes.

• Playback Mode: Tap the Playback Mode button to switch between Single-Video Loop (repeats the current video) and Play-All Videos (the next video starts automatically after the current one).

• Playback Progress: Drag the progress bar to fast-forward or rewind the current video, or touch and hold the or button to fast-forward or rewind.

10.23 System Update(OTA)

Your device supports over-the-air (OTA) firmware updates, allowing you to receive new features and system improvements easily. We recommend checking regularly for available updates in the System Update app to ensure your device stays up to date.

Features:

• Check for Updates

Automatically checks for new firmware versions to ensure users receive the latest feature enhancements and bug fixes.

• Online Download and Installation

Supports downloading update packages directly via Wi-Fi or mobile data, and installing them on the device without needing a computer or USB drive.

• Update History Review

Allows users to view the current system version and past update logs to understand the improvements made.

• Improved System Stability and Security

Regular updates help improve system reliability, enhance compatibility, and ensure optimal performance.

10.23.1 Online Update Steps

1. Tap the System Update App to check if a new version is available.

(The system will automatically detect updates.)If an update is found, tap Download to begin downloading the update file.

1. Once the download is complete, tap Install and confirm the prompt to start installation. The system will reboot automatically to complete the update.

Note: The P10 supports performing local updates via a USB drive. Please ensure the device remains powered on during the process.

10.23.2 Local Update Steps

1. Download the firmware update package (ZIP file) corresponding to your device model (P10) from the official ATOTO website.
2. Extract the downloaded ZIP file on your computer.
3. Copy all extracted files to the root directory of the USB drive (do not place them inside any folder).
4. Insert the USB drive into the rear USB-C port of the P10 device. Use an adapter cable if necessary.
5. When the system detects the update files, an Upgrade tools window will appear on the screen.

First, tap All/None to select all items,

then tap Upgrade to start the update process.

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

1. After the update is complete, the screen will display a message indicating that the update was successful. Please remove the USB drive, and the device will restart automatically to complete the upgrade.

Tips: Do not disconnect the power or remove the USB drive during the update.

After the reboot, allow a few minutes for the main interface to load completely.

Chapter 11 Split Screen

The P10 supports Multitasking View and Split Screen, allowing users to manage and run multiple apps efficiently for better driving convenience.

Multitasking View:

From the Home Screen, swipe up from the bottom of the screen to enter Multitasking View, where all running apps are displayed.

• Swipe up individual app cards to close them.
• Tap the “Clear all” button at the top left to close all running apps.

Note: Swiping up from the bottom in the App Drawer screen will go to the Home Screen, not enter Multitasking View.

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

【AI图解：This image shows the Multitasking View interface. Running apps are displayed as card previews arranged on the screen. Swipe up from the bottom of the Home Screen to enter this view. Swipe up on an individual app card to close that app. The “Clear all” button located at the upper-left side closes all running apps at once. Some app cards may display a Split Screen icon at the bottom, indicating support for Split Screen mode. When activated, two apps can run simultaneously on the same screen, with the first selected app placed on the right side by default.】

Split Screen:

Some apps in Multitasking View support Split Screen. Supported apps will show a “Split” icon at the bottom of their app card.

• If only one app is opened, even if it supports Split Screen, the icon will not appear.
• Once activated, users can run two apps simultaneously on the same screen, e.g., Navigation + Music, or Web Browser + Video, without frequently switching apps.
• The first app selected for Split Screen will be placed on the right side of the screen by default.

Split Screen Operation Steps (Example for Reference)

Assume multiple apps are running in the background, such as Local Music, Navigation, YouTube, Chrome, etc.

Step 1: Enter Multitasking View

Swipe up from the bottom of the Home Screen to view all running apps.

Step 2: Check if the App Supports Split Screen

In Multitasking View, the “Split” icon is only visible for the currently selected (largest) app card.

For other smaller app cards, tap the app to open it, then swipe up from the bottom of the screen to check if the “Split” icon appears. If displayed, the app supports Split Screen.

Step 3: Perform Split-Screen Operation

Tap the “Split” icon on the target app card

Select another app from the Multi-Task list to complete the Split Screen setup

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

Step 4: Adjust and Exit Split Screen

Drag the middle dividing line to adjust the size ratio of the two windows

Drag the dividing line to the far left or right to exit Split Screen and return to full-screen mode (single app)

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

Notes:

• Split Screen is only available for apps that support this feature
• At least two apps must be opened or running in the background for Split Screen to function
• If you attempt to select an app for Split Screen that does not support this feature, a notification will appear indicating that the app is not compatible.

Chapter 12 Settings

12.1 Network Settings

This section introduces the Network Settings function of the P10, including Wi-Fi (WLAN), Data Saver, Mobile Network, Hotspot, and VPN, which help you optimize network connectivity and maintain stable and secure performance during use.

12.1.1 Wi-Fi (WLAN) Settings

To access Wi‑Fi (WLAN): Go to Settings App > Network Settings (Cellular tower icon) > WLAN

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

WLAN (Wireless Local Area Network), commonly known as Wi-Fi, enables wireless internet access.

The P10 supports Wi-Fi connectivity, allowing you to:

• Enjoy high-speed internet access — Connect to Wi-Fi networks at home, in the office, or in public areas.
• Save mobile data — Reduce 4G data usage and lower data costs.
• Software updates — Some system updates require a Wi-Fi connection to ensure stability and save mobile data.

12.1.2 Data Saver Settings

To access Data Saver: Go to Settings App > Network Settings (Cellular tower icon) > Data Saver

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

The Data Saver feature helps control background data usage and reduce unnecessary mobile data consumption. This setting applies only to mobile data (4G) and does not affect Wi-Fi connections.

On the Data Saver page:

• To use Data Saver, first toggle the Data Saver switch to enable the feature.
• Then, toggle the app switches to allow or block background mobile data for each app.

12.1.3 Mobile Network Settings

To access Mobile Network:

Go to Settings App > Network Settings (Cellular tower icon) > Mobile Network

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

The P10 features built-in 4G LTE connectivity and supports the use of a Nano SIM card (sold separately) for mobile data in areas without Wi-Fi.

Insert the Nano SIM card:

1. Use the SIM ejector tool to eject the SIM card tray, and take note of which side the eject hole is on for correct re-insertion later.
2. Align the Nano SIM card with the markings on the tray, then carefully insert the tray back into the device. For easier insertion, it’s recommended to remove the P10 from its mount beforehand.

Enable mobile network:

1. Go to Settings > Network Settings > Mobile Network.
2. Toggle Mobile data to enable cellular connectivity.
3. Toggle Roaming if you need to use data while roaming.

Set data usage limits (optional):

1. Tap Data warning & limit to open the corresponding page.
2. Enable Set data warning, then tap Data warning to set a usage warning (e.g., 2GB).
3. Enable Set data limit, then tap Data limit to specify a maximum usage threshold (e.g., 5GB).

12.1.4 Hotspot Settings

To access Hotspot: Go to Settings App > Network Settings (Cellular tower icon) > Hotspot

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

The P10 features an integrated 4G LTE module (requires a separately purchased Nano SIM card with an active data plan), allowing it to function as a mobile hotspot and share its cellular data connection with other devices—turning your vehicle into a portable Wi-Fi hub.

You can share the network in two ways:

• Wi-Fi Hotspot: Broadcast a Wi-Fi signal for nearby devices to connect.

1. Toggle Use Wi-Fi hotspot to enable it. (Hotspot > Wi-Fi Hotspot > Use Wi-Fi Hotspot).
2. You can customize the hotspot name and password, and optionally enable Turn off hotspot automatically to stop the hotspot when no devices are connected.

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

• Bluetooth Tethering: Share the internet connection via the system’s Bluetooth.

1. Toggle the switch to enable it, then pair the device that needs internet access with the P10’s system Bluetooth.

Note: Hotspot and network sharing functions are unavailable when Data Saver is enabled.

12.1.5 VPN Settings

VPN (Virtual Private Network) technology creates a secure, encrypted connection over a public network.The VPN feature on the P10 enhances user privacy and network security.

Main Benefits:

• Protect Privacy — Masks your real IP address to prevent tracking.
• Access Restricted Content — Bypasses regional restrictions for certain websites or services.
• Enhance Security — Encrypts data transmission, especially on public Wi-Fi.
• Flexible Protocol Support — Supports IKEv2/IPSec MSCHAPv2, IKEv2/IPSec PSK, and IKEv2/IPSec RSA protocols.

To access VPN: Go to Settings APP> Network Settings > VPN.

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

Add a New VPN Profile:

Tap the “+” icon in the upper-right corner to add a new VPN profile, and fill in the following details:

• Name: Custom VPN name (e.g., “Company VPN” or “Personal VPN”)
• Type: Select the VPN protocol (e.g., PPTP, L2TP/IPSec PSK, IPSec Xauth)
• Server Address: Enter the server IP or domain name (provided by your VPN provider)
• Username / Password: Enter login credentials if required
• Additional options (e.g., Always-on VPN)

Tap Save to store the configuration.

Connect to VPN:

1. Select the saved VPN profile.
2. Enter authentication info if prompted.
3. Wait for the VPN icon (key or shield) to appear in the status bar.

Disconnect or Delete VPN:

(1) Disconnect the VPN connection

Go to VPN settings, click the connected VPN name, and select "Disconnect".

(2) Delete the VPN configuration

Long-press the VPN configuration name and select "Delete".

12.2 User Settings

The User Settings menu allows you to configure personal and device-related options on the P10. Available settings include:

1. Manage Accounts
2. Google Services
3. Language & Input
4. Security Settings
5. Screen Lock
6. Location Services

12.2.1 Manage Accounts

To access Manage Accounts: Go to Settings APP > User Settings > Accounts.

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

Usage:

• Log in with an existing Google account, or
• In Accounts for Owner, tap Add account to add a new account:

Choose Google to log in with a Google account, or

Choose Label to scan a QR code via SSHub for account login.

• Enable Automatically sync app data to refresh app data in the background.

12.2.2 Google Services

To access Google Services: Go to Settings APP > User Settings > Google.

Description:

• Manage Google-related services, such as Google Play Store, Google Maps, Voice Assistant, etc.
• Control data synchronization and privacy permissions.

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

12.2.3 Language & Input

To access Language & Input: Go to Settings APP> User Settings > Language & Input.

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

12.2.3.1 Language Settings

System Language Settings

1. Tap Languages(User Settings > Language & Input > Languages) to open the language list.Press and drag your preferred language to the top of the list; it will take effect shortly.

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

1. If the desired language is not listed, tap Add a language to add it (some languages may not be supported). After adding, drag it to the top to activate.

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

Remove a language: Tap Remove, check the boxes next to the languages you want to delete, then tap Remove at the bottom. Confirm by tapping Remove in the pop-up window.

App Language Settings

1. Tap App Languages to view the list of apps that support language selection (only some apps support this).
2. Tap an app and select your preferred language (including system default) to set the app language.

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

12.2.3.2 Input Settings

On-screen Keyboard (User Settings > Language & Input > On-screen Keyboard)

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

1. Tap On-screen keyboard to view the list of available input methods.
2. Toggle the switch to enable or disable each input method.

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

Physical Keyboard (User Settings > Language & Input > Physical Keyboard)

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

1. Tap Physical keyboard to open the Keyboard assistance page.
2. Toggle Use on-screen keyboard to enable or disable displaying the on-screen keyboard while typing on the physical keyboard.
3. Tap Keyboard shortcuts to view the available shortcuts.

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

12.2.4 Security Settings

To access Security Settings: Go to Settings APP > User Settings > Security.

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

This section provides access to Google-managed security services, including:

• Google Play Protect: Regularly scans apps for potential threats to help keep your device secure.
• Find My Device: Allows you to locate, lock, or erase your device remotely when signed in with a Google account.
• Security Update: Shows the Android version and the latest security patch available for this device.

You can also access More security settings, which provides options for SIM card lock and Encryption & credentials management.

12.2.5 Screen Lock

The screen lock feature is designed to protect your P10 from unauthorized access and to safeguard personal data (such as navigation history or account information). You can unlock the screen using a passcode or a paired Bluetooth device.

12.2.5.1 Configure Screen Lock and Passcode

1. Access Screen Lock: Go to Settings App > User Settings > Screen Lock.
2. On the Screen Lock page, turn on the switch at the top-right corner to enable this feature.
3. Enter the current passcode (the default passcode is 1234).
4. Enter a new passcode.
5. Re-enter the new passcode.
6. Tap OK.

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

12.2.5.2 Bluetooth Lock Screen

The P10 can automatically lock or unlock the screen using a paired Bluetooth device (such as a mobile phone). When a paired device is nearby, the screen remains unlocked; when the device disconnects or moves out of range, the screen locks automatically.

Configure Bluetooth Lock Screen

1. Access Screen Lock: Go to Settings App > User Settings > Screen Lock.
2. Tap Unlock with BT to view previously paired hands-free Bluetooth devices. You can select one or multiple devices.(If no devices are displayed, first pair your device with the P10.)

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

1. Test Bluetooth Lock/Unlock: After selection, tap Unlock with BT again to return to the numeric keypad, then tap the lock icon at the bottom to test the connection. When your phone is connected to the P10, the screen will unlock within 1–2 seconds.

Note: Only the currently connected device will be used for automatic lock/unlock. Make sure to remember the new passcode you just set.

Important: If you cannot access the P10 due to a forgotten passcode, long-press the rear Power button for 10 seconds to perform a factory reset. All user data will be deleted permanently. This action is irreversible. Please proceed with caution.

12.2.6 Location Services

To access Location Services: Go to Settings App > User Settings > Location.

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

1. Turn on "Use location" to allow the P10 to access location information.
2. After it is enabled, the system can provide accurate navigation, nearby service search, emergency assistance, and other location-based functions.You can also view which apps have permission to use location information.
3. On the Location Services page, check the list of apps and adjust their location permissions if needed.

12.3 Display Settings

Display Settings are used to adjust and optimize the visual effects of the P10, helping improve viewing and operation while driving. To access Display Settings: Go to Settings App > Display (AA icon).

On the Display page, you can configure the following options:

1. Static Wallpaper
2. Live Wallpaper
3. Icon Style
4. Home Screen
5. Dark Theme
6. Screen Saver
7. Floating Shortcut Bar
8. Immersive Navigation Bar

12.3.1 Wallpaper Customization

1. Static Wallpapers

The P10 comes pre-installed with multiple high-resolution static wallpapers, including natural landscapes, abstract art, and other visual themes. Users can switch wallpapers with one tap in the system settings.

Set Static Wallpaper – Path 1:

Go to Settings APP > Display(AA icon)> Static Wallpaper > Set as Home Screen Wallpaper

or Set as App Wallpaper (supported by certain apps such as Handsfree BT).

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

Set Static Wallpaper – Path 2:

Go to Home Screen > App Drawer > Pictures App

Step 1: Open the Pictures App.

Step 2: Select your desired image.

Step 3: Tap the Picture icon to set the selected image as the Home Screen wallpaper.

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

2. Live Wallpaper

The P10 supports animated live wallpapers, featuring effects such as soft motion, starry night skies, ocean waves, and more—creating an immersive cockpit atmosphere.

Set Live Wallpaper Path:

Go to Settings APP > Display(AA icon) > Live Wallpaper > Set as Live Wallpaper

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

Note: Static Wallpaper and Live Wallpaper options are preset by the system.

12.3.2 Icon Style Customization

The P10 provides two default icon styles for pre-installed apps: square icons and round icons.

Set Icon Style Path: Go to Settings > Display(AA icon) > Icon Style > Select Icon Style

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

12.3.3 Home Screen Theme Customization

The P10 includes three preset home screen themes, and also provides three customizable theme slots. Users can freely design and save personalized themes for later use.

Home Screen Theme Path: Go to Settings APP > Display(AA icon) > Home Screen

To customize a theme:

1. Tap Custom 1 (or Custom 2 / Custom 3).
2. Tap Click to Design at the top of the screen to start customizing the theme.
3. After completing your design, tap Done at the top to save it.
4. Tap Apply to use the customized theme immediately, or keep it saved for future use.

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

12.3.4 Dark Theme

Dark Theme allows the interface and supported apps to switch from a light background (white) to a dark background.

Turn on Use Dark Theme to enable this feature, or tap the sun icon (Day/Night Mode) in the Control Panel to switch directly.

This helps reduce screen glare, improves nighttime visibility, and provides a more comfortable viewing experience while driving.

Dark Theme Path: Go to Settings APP > Display (AA icon) > Dark Theme

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

12.3.5 Screen Saver

The P10 provides two screen saver modes: Photo Frame and Photo Table.

Users can also adjust how long the device remains idle before the screen saver starts, as well as the slideshow interval for photos. You can tap the eye icon in the top-right corner to preview the selected screen saver.

Screen Saver Path: Go to Settings APP > Display (AA icon) > Screen Saver

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

Note: The screen saver doesn’t lock the device. Tap anywhere on the screen to enter the interface.

12.3.6 Floating Shortcut Bar

The Floating Shortcut Bar is a quick access panel that floats above the home screen or other interface layers. It appears as a semi-transparent, draggable floating circle (similar to the "floating ball" on smartphones) used for quick access to commonly used functions or applications.

Enable Display Floating Shortcut Bar to use this feature.

Floating Shortcut Bar Path: Go to Settings APP > Display (AA icon) > Floating Shortcut Bar

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

Two display modes are available:

• Only CP/AA – The floating icon appears only in CarPlay or Android Auto mode.
• ALL – The floating icon remains visible on all screens.

You can also set the Auto-hide Time, which determines how long the panel stays expanded before shrinking back into a floating circle.

You can customize the shortcut buttons in the panel:

1. Tap the floating circle to open the panel
2. Tap the Edit icon to enter the editing page
3. Tap “–” to remove a button
4. Tap “+” to add a button

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

12.3.7 Immersive Navigation Bar

Some applications or web pages place buttons or interactive elements at the very bottom of the screen. In these cases, the bottom content may overlap with the P10 Shortcut Bar, making certain buttons difficult to tap.

Enabling Immersive Navigation Bar for specific apps automatically shifts the bottom content upward so it no longer overlaps with the Shortcut Bar. This ensures that text, buttons, and links at the bottom remain visible and clickable.

Immersive Navigation Bar Path: Go to Settings APP > Display (AA icon) > Immersive Navigation Bar

You can enable this feature for individual apps as needed.

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

12.4 System Settings

System Settings are used to manage key functions of the P10, ensuring smooth operation and integration with connected devices. These settings allow you to configure system-level features such as sound, Bluetooth, camera behavior, and startup preferences.

To access System Settings: Go to Settings App > Settings(Gear icon).

On the System Settings page, you can configure the following options:

(1) Sound

(2) Cameras

(3) Auto-Start

(4) Default Navigation

(5) Voice Button Shortcut

(6) System BT

(7) AutoNap Battery Level

12.4.1 Sound Settings

To access Sound Settings: Go to Settings APP > Settings (Gear Icon) > Sound

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

1. Touch Sound

Controls whether a sound is played when interacting with the touchscreen. Tap the switch on the right to turn this feature on or off.

1. Default Volume

When enabled, the system automatically resets the volume to the default level each time the device starts. When disabled, the system retains the last-used volume level after restart.

1. Volume Controls

Adjust the volume for different categories using the on-screen sliders. The numeric value shows the current volume level.

• Media Volume – Adjusts the playback volume for music and videos.
• Navigation Volume – Adjusts the voice guidance volume during navigation.
• Voice Assistant Volume (CarPlay/Android Auto or DriveChat) – Adjusts the prompt and conversation volume for voice assistants.
• Call Volume – Adjusts the in-call volume for Bluetooth phone calls.
• Touch Volume – Adjusts the volume of touch feedback sounds.

1. Navigation–Media Mixing Mode

Determines how navigation voice prompts interact with media playback. When navigation guidance occurs, the system automatically adjusts media volume based on the selected mode.Available options:

• Lower Volume – Media volume decreases automatically during navigation prompts.
• Silence – Media playback pauses while navigation prompts are active.
• Navi/Music Overlay – Both navigation and media play simultaneously.

Note: Mixing may be disabled due to system limitations.

12.4.2 Camera Settings

To access Camera Settings: Go to Settings APP > Settings (Gear Icon) > Cameras

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

1. Rear-view Mirroring

Enables 180° rotation of the rear-view camera image when needed.

1. Reverse Guidelines

Enable or disable the display of reverse guidance lines on the screen.

1. Auto-Center Reverse Guidelines

When enabled, the reverse guidelines automatically center on the display to assist with vehicle positioning.

1. Audio Mix When Reversing

Controls how navigation prompts interact with media audio while reversing.

Available options:

Lower Volume – Reduces media volume during reversing.

Silence – Pauses media playback during reversing.

Keep Volume – Maintains media volume while reversing.

Note: Mixing may be disabled due to system limitations

Camera settings are available for wired cameras only and do not apply to wireless camera connections.

12.4.3 Auto-start Settings

To access Auto-start Settings: Go to Settings APP > Settings (Gear Icon) > Auto-start

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

The Auto-start Settings allow you to choose an app from the “Currently Used” list to launch automatically when the P10 is powered on or restarted. This does not apply when waking the device from sleep or standby.

To set up Auto-start:

1. Tap the switch to enable Auto-Start.
2. Tap to select an app from the list to launch automatically when the device powers on or restarts. Once configured, the selected app will open automatically each time the P10 is turned on.

Note: Not all apps support Auto-Start functionality. If an app opens automatically at startup unexpectedly, it may have been previously assigned as the Auto-Start app. You can check this under Settings > Auto-Start and disable Auto-Start if needed.

12.4.4 Default Navigation

To access Default Navigation: Go to Settings APP > Settings (Gear Icon) > Default Navigation

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

The Default Navigation feature allows you to assign a selected app for quick access via Maps.

From the list of installed apps, select the app you want to use as a quick-access shortcut.

Open the Maps app. It will automatically sync and launch the app you just selected.

12.4.5 Voice Button Shortcut Settings

To access Voice Button Shortcut: Go to Settings APP > Settings (Gear Icon) > Voice Button Shortcut.

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

The P10 comes pre-installed with DriveChat (AI voice assistant) and is also compatible with Google Assistant and CarPlay/Android Auto (CP/AA) voice control. You can choose your preferred voice assistant according to your personal needs.

In this menu, you can select one of three options — DriveChat, Google Assistant, or CP/AA Voice Control — as your preferred voice assistant.

Once the selection is made, tapping the DriveChat icon on the home screen will activate the corresponding assistant:

• If DriveChat is selected, the icon launches DriveChat directly (when your DriveChat account has been logged in and the wake word has been set up).
• If Google Assistant is selected, it opens Google’s voice control service.
• If CarPlay or Android Auto is selected, the icon works as a shortcut to your phone’s voice assistant (such as Siri, Google Assistant, or another built-in assistant depending on your smartphone).

1. Introduction to DriveChat

DriveChat is our self-developed AI voice assistant, built on GPT generative AI technology. It allows users to interact with the system hands-free, providing real-time responses to queries such as weather information, as well as executing voice commands for navigation, media playback, and other key functions.

DriveChat supports both online and partial offline voice commands, enabling users to complete essential operations without touching the screen while driving.

The system allows the setup of two distinct wake words:

One wake word is used for executing voice commands.

The other wake word is used for conversational interactions and quick inquiries.

This dual wake word configuration ensures convenient and flexible interaction, improving safety and usability during driving.

1. Introduction to Google Assistant

Google Assistant is an AI voice assistant developed by Google, featuring natural language recognition and intelligent command execution. Users can interact with the P10 via voice commands, enabling hands-free operation, which enhances convenience and driving safety.Functions: Google Assistant supports control of commonly used functions, such as navigation, media playback, phone calls, schedule inquiries, and weather forecasts. It also understands context, allowing continuous semantic recognition and intelligent recommendations.

Activation Methods:

Voice Activation: Say the wake-up phrase, e.g., “Hey Google” (ensure voice wake-up is enabled).

Button Activation: Press and hold the voice button to start the selected assistant.

Manual Activation: Tap the Google Assistant icon in the main interface to access the assistant.

12.4.6 System BT

For information about the P10’s Bluetooth functions, please refer to the Bluetooth Connection Chapter > System BT.

To access System BT: Go to Settings APP > Settings (Gear Icon) > System BT

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

System BT – Pairing a New Device

To pair a phone with the P10:

1. Turn on Bluetooth on your phone.
2. On the P10, go to System BT and tap Pair new device to start searching.
3. When your phone name appears on the P10, tap to select it.
4. A pairing request will pop up on both devices. Tap Pair / Allow on your phone and on the P10.
5. After pairing is completed, the phone will appear in the paired device list.

Note: When the P10 is connected to a phone via system Bluetooth, the connection is mainly used for internet sharing, allowing the P10 to access the internet through the phone’s mobile data. In some cases, you may need to enable Bluetooth tethering on your phone for the connection to take effect.

The system Bluetooth also supports connecting to various BLE accessories, such as Bluetooth diagnostic tools (OBD scanners), AI Interactive LED Signs, ambient lights, and off-road lights.

12.4.7 AutoNap battery level

To access AutoNap Battery Level: Go to Settings APP > Settings (Gear Icon) > AutoNap battery level

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

Enable AutoNap Battery Display to show its battery icon on the P10 screen (when the P10’s System BT is connected to AutoNap), allowing users to monitor its status at a glance.

About AutoNap:

AutoNap is a smart cup-holder battery that charges while driving and provides standby power to the P10 when the vehicle is turned off. This enables features such as:

• Parking Monitor
• 2-second screen wake, restoring the last interface
• Time auto-sync during standby

Note: The AutoNap provides standby power without drawing from the vehicle battery. Download the SSHub app to view detailed AutoNap information, including battery status, version, and parking monitoring videos.

12.5 General Settings

To access General Settings: Go to Settings App > General Settings (Info icon).

The General Settings allow users to configure and manage basic system-related functions, including:

1. About
2. Date and Time
3. Accessibility
4. GPS
5. Storage
6. Apps
7. Digital Assistant
8. Reset

By adjusting these settings according to personal preferences, users can make the system better suited to their own needs and enhance the overall driving experience.

12.5.1 About Device

To access device information: Go to Settings APP > General Settings (Info icon) > About.

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

The About section displays key system and hardware information, including system version (e.g., AICE UI 13.0), RAM, CPU model, App version, and Bluetooth version. It provides a clear overview of the device’s current configuration. Users can check this section to quickly understand the system and hardware status of the device.

12.5.2 Date and Time

To access Date and Time Settings: Go to Settings APP > General Settings (Info icon) > Date and Time.

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

The Date and Time Settings feature allows you to set the date, time, and time zone on the P10. You can switch between 24-hour and 12-hour formats as needed. The system supports automatic network time synchronization, ensuring accurate time display for functions such as navigation, schedule reminders, and log recording.

Details are as follows:

1. Set Time Automatically: Tap to enable/disable “Set Time Automatically”.
2. Set Time Zone Automatically: Tap to enable/disable “Set Time Zone Automatically”.
3. Time Format: Tap to enable/disable “Time Format”. You can switch between 24-hour and 12-hour formats as needed.

12.5.3 Accessibility

To access Accessibility Settings: Go to Settings APP > General Settings (Info Icon) > Accessibility.

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

The Accessibility menu includes the following features:

1. Display size and text

Adjust visual comfort for reading and interface recognition.

• Change font size (Small / Medium / Large)
• Enable Bold text to increase character thickness
• Enable High contrast text to maximize contrast with the background
• Tap Reset Settings to restore all display and text options to default

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

1. Color and motion

This section helps you adjust the screen display for better visibility, color recognition, and visual comfort during driving.

• Color Correction

Use Color Correction when the display colors appear inaccurate, unclear, or difficult to distinguish.

This feature adjusts the screen’s color rendering to improve readability for users with specific vision preferences or color perception differences.

Several modes may be available (e.g., Red–green, Blue–yellow, or Grayscale), allowing you to select the one that provides the best viewing comfort.Example:

If red or green elements on the navigation map appear indistinct, enabling Color Correction can make route lines, traffic alerts, and map icons easier to recognize.

• Color Inversion

Color Inversion reverses the display colors—for example, white becomes black and black becomes white—to enhance text visibility in bright or low-light conditions.

This can be helpful when driving at night or under strong sunlight, as it reduces glare and visual fatigue.

Note:Media, photos, and videos will also appear inverted. Color inversion applies to all apps and interfaces.If you simply prefer a darker screen background, you can use Dark Theme instead of full color inversion.

• Remove Animations

Enable this feature to reduce on-screen movement and transition effects.

It minimizes motion during menu navigation or app switching, providing a smoother and more stable viewing experience—especially useful while driving or for users sensitive to screen motion.

• Large Mouse Pointer

Enable this feature to display a larger and more visible mouse pointer on the screen.

This makes it easier to locate and operate the cursor when using a connected touchpad or mouse accessory.

1. Extra Dim

Enable this feature to dim the screen beyond your device’s minimum brightness level.

This option helps reduce eye strain and glare when driving or using the device in dark environments such as tunnels or during nighttime.

When enabled, you can adjust the dimming intensity using the on-screen slider to achieve a comfortable brightness level.

Note: Extra Dim does not affect automatic brightness adjustment. You can use both features together for optimal visibility and comfort.

1. Magnification

Enable the Magnification shortcut to enlarge content on the screen, making text and images easier to see.This feature provides flexible ways to zoom in temporarily or continuously, depending on your visual needs.

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

• To zoom in:

1. Use the shortcut to start Magnification.
2. Tap the screen once to activate zoom mode.
3. Drag two fingers to move around the screen.
4. Pinch with two fingers to adjust the zoom level.
5. Use the shortcut again to stop Magnification.

• To zoom in temporarily:

1. Make sure the Magnification type is set to full screen.
2. Use the shortcut to start magnification.
3. Touch and hold anywhere on the screen.
4. Drag your finger to move around the screen.
5. Release your finger to return to the normal view.
6. Live Caption

Enable this feature to automatically generate on-screen captions for media playing on your device. This includes videos, podcasts, and audio messages — and on supported devices, even phone calls.

Once enabled, captions appear instantly when speech is detected, helping you follow what’s being said even in noisy environments or when muted.

1. Caption preferences

Enable this feature to display subtitles and customize their appearance throughout compatible apps. Toggle Show captions to turn captions on or off, and then adjust text size, style, color or background to suit your preference.

12.5.4 GPS Settings

The GPS Settings page displays the vehicle’s current coordinates and satellite signal information, allowing you to monitor GPS/GLONASS performance and positioning accuracy. It also provides a Mode switch (Mode 1/Mode 2) for different satellite views and supports “Auto Sync” to automatically update the system time based on GPS signals.

To access GPS Settings: Go to Settings APP > General Settings (Info Icon) > GPS.

Mode 1 (Bar Signal View): Shows signal strength and SNR of each satellite using vertical bars. GLONASS is displayed on the top-left, GPS on the bottom-left. Each bar represents one satellite, with height and color indicating signal quality. Some bars display satellite PRN/channel numbers.

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

Mode 2 (Sky Plot View): Shows satellites in a polar coordinate “sky plot”, with azimuth angles labeled around the outer circle and zenith at the center. Different colors or icons indicate different constellations, and a legend in the bottom-left corner identifies GLONASS and GPS symbols.

The right information area (shared by both modes) shows longitude, latitude, GPS status, tracked/available GPS and GLONASS satellites, and satellite-provided date and time. Users can enable the Auto Sync switch to synchronize the system time with the satellite-provided time.

Note: GPS time synchronization depends on satellite reception. In conditions such as underground parking, indoor garages, dense urban areas, or when the vehicle has just started and positioning has not yet been established, GPS signals may be weak or temporarily unavailable.

12.5.5 Storage Management

The Storage Management is used to view and manage the internal storage space usage of P10, including system occupation, application data, media files, downloads, and cache data, as well as removing infrequently used applications. Through this feature, users can clean up redundant files and free up space, ensuring smooth and stable system operation.

To access Storage Management: Go to Settings APP > General Settings (Info Icon) > Storage.

Storage manager:

Tap Storage manager to enter its settings page. Enable Use Storage manager(toggle the switch) to allow the system to automatically manage storage space.

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

You can also tap Remove photos & videos to open a pop-up window, then choose to delete backed-up photos and videos that are older than 30, 60, or 90 days.

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

Free Up Space:

Tap Free up space to open the corresponding interface. Select the files you wish to delete, then tap Free up to remove them and reclaim storage space.

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

To free up memory, tap Review Recent Items at the bottom of the screen. Then, tap the More options icon (three dots) in the upper-right corner and select Show all items. Choose the applications you want to free up memory for, and tap Free up.

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

12.5.6 APP Management

The App Management function is used to view, control, and manage applications installed on the P10. Users can use this feature to open apps, force close or stop apps, uninstall apps, clear app data and cache, and configure default app permissions. By managing application resources effectively, users can free up system storage, improve performance, and ensure the stable operation of essential apps.

To access App Management: go to Settings APP > General Settings (Info Icon) > App.

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

12.5.7 Digital Assistant

Digital Assistant can provide help based on the information displayed on your current screen. Some apps support both launcher and voice input services to offer integrated assistance.

To access Digital Assistant: Go to Settings APP > General Settings (Info Icon) > Digital Assistant.

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

To provide contextual help, the assistant may need access to information displayed on your current screen.Based on this information, it can offer relevant suggestions or actions, such as identifying phone numbers, navigation routes, or search topics.

Screen Access Options

• Use text from screen

Allow the assistant app to analyze the text displayed on the screen to identify relevant actions or information.

• Use screenshot

Allow the assistant app to capture a static image of the screen to better understand what’s shown and provide related assistance.

• Flash screen

When this option is turned on, the screen edges briefly flash whenever the assistant accesses on-screen text or a screenshot, indicating activity.

12.5.8 Reset Settings

To access Reset: Go to Settings APP > General Settings (Info Icon) > Reset.

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

The Reset Settings are used to restore your P10 to its initial or factory state. Users can choose different levels of reset based on their needs, including resetting network settings, resetting app preferences, or performing a full factory data reset. This feature is suitable for scenarios such as system malfunctions, app conflicts, disorganized settings, or preparing the device for transfer. Details are as follows:

(1) Reset Wi-Fi, mobile & System BT:

This will reset network settings, including Wi-Fi, mobile network, and System Bluetooth (Bluetooth tethering).

(2) Reset app preferences:

This will reset all preferences for:

·Disabled apps

·Disabled app notifications

·Default applications for actions

·Background data restrictions for apps

·Any permission restrictions

Note: You will not lose any app data.

(3) Erase All Data (Factory Reset):

This will erase all data from your device’s internal storage, including:

·Your Google Account

·System and app data and settings

·Downloaded apps

·Music

·Photos

·Other user data

Note: Once the reset is performed, all corresponding settings will return to their default system configurations and CANNOT BE RECOVERED! Please consider carefully before deciding whether to proceed with the reset.

Chapter 13 Accessories

Depending on the P10 model or bundle version, the included accessories may vary.

This chapter introduces the main accessories available for the P10 series and explains their functions and connection methods.

Accessories:

• AutoNap Cup-Holder Battery
• Wired Camera (AC-P106C25)
• Wireless Camera Kit (WR2-12HDLR)
• Bluetooth OBD II Scanner (AC-4450)

13.1 AutoNap

13.1.1 About AutoNap

AutoNap (full name: AutoNap Holder Battery) is a smart cup-holder battery designed to provide standby power for the P10 after the vehicle is turned off.

It eliminates the need for hardwiring to the fuse box, offering a plug-and-play solution for parking monitor and power management.During driving, AutoNap automatically charges. When the vehicle is turned off, it switches to standby power mode, supplying energy to the P10 for continued operation. This allows essential features to remain active even after ignition is off.

With AutoNap connected, the P10 supports:

• Parking Monitor – Continue recording or motion detection after the vehicle is turned off.
• 2-Second Wake-Up – Instantly restores the previous interface when the vehicle restarts.
• Auto Time Sync – Keeps system time accurate during standby without manual adjustment.

Featuring ≤18 mA ultra-low standby power consumption, AutoNap can typically maintain operation for up to 72 hours under normal conditions (actual time varies based on impact frequency and battery capacity).

When vibration or movement is detected, it powers on the P10 within two seconds to capture critical footage—helping users stay aware of the vehicle’s condition and reduce potential losses. AutoNap does not draw power from the vehicle battery and works with both types of vehicle power outlets — those that cut power after the vehicle is locked and those that remain powered.

13.1.2 Pairing AutoNap

Steps:

1. After the P10 is powered, open System BT and tap Pair new device.
2. Tap AutoNap in the device list.
3. When the pairing request pop-up appears, tap PAIR.
4. After pairing, use short/long presses on the buttons or knob to control the assigned functions.

Note (DriveChat button): Open DriveChat on the P10 to display the login QR code, then scan it with SSHub (download if needed). Otherwise, the button will not respond.

13.1.3 Buttons and Functions

【AI图解：This image shows the physical control layout with button shapes and positions. On the left side, three vertically arranged trapezoid buttons are numbered from top to bottom: No.1 is a double-arrow with phone icon, representing Prev / Hang Up [System BT]; No.3 is a play/pause with camera icon, representing Play / Pause [Front Cam]; No.5 is a home icon with a star symbol, representing Home [Next Home Page]. On the right side, three vertically arranged trapezoid buttons are numbered from top to bottom: No.2 is a double-arrow with phone icon, representing Next / Answer [Hands-free BT]; No.4 is labeled “CPAA” with a camera symbol, representing CPAA [Cabin Cam]; No.6 is labeled “C1 / C2”, representing Photo [Lock Clip]. The center features a circular rotary knob (No.7) for Volume Adjustment by rotation and press. Above the knob is a small round button (No.8), representing Drivechat Voice Command [Voice Chat]. Functions shown in brackets [ ] are activated by long press.】

13.1.4 Indicator Lights

【AI图解：This image shows the indicator light positions on the device. ① is the Battery Indicator, located above the rotary knob as four small round LED lights. When four blue lights run in sequence, AutoNap is charging or fully charged. When the blue light is solid (ACC Off), it indicates the remaining battery level. ② is the SYS Indicator, located at the lower-left side labeled “SYS.” A blue flashing light indicates connection to vehicle power. A blue solid light (ACC Off) indicates AutoNap is working. ③ is the PWR OUT Indicator, located at the lower-right side labeled “PWR OUT.” When the light is off, there is no power output. When the blue light is solid (ACC Off), it indicates power is being supplied to the P10.】

When the P10 is powered from the vehicle power outlet (ACC On / driving), AutoNap charges automatically. When the vehicle is turned off (ACC Off / parked), AutoNap switches to standby mode and supplies power to the P10.

The indicator lights show the current status.

13.1.5 AutoNap Management (SSHub App)

Use the SSHub app to view and manage AutoNap (for example, check remaining battery level, charging status, voltage/temperature, rename the device, and check for firmware updates). The SSHub app is not required for AutoNap to work with the P10.

Download SSHub:

Search “SSHub” in Google Play or the App Store, then install the app on your smartphone before pairing with AutoNap.

13.1.5.1 Add AutoNap in SSHub

1. Confirm Power Supply

When the AutoNap is properly connected and powered, the SYS indicator flashes blue, indicating that it is ready for Bluetooth connection.

1. Bluetooth Connection

Enable Bluetooth on your phone, find [AutoNap_XXXXXXX] in the device list, and tap to pair.

1. Pair in SSHub App

Open the SSHub App and follow the on-screen instructions to complete pairing.

1. Complete Pairing

Once paired, the AutoNap will appear in the app and can be monitored and configured.

Note: The data shown below is for reference only. Please refer to the specifications of your ATOTO AutoNap Holder Battery for exact details.

Viewing System Notifications:

Tap the Notifications icon (bell) in the top-right corner of the SSHub App to check system messages or Parking Monitor notifications.

13.1.5.2 Device Management

Set Your AutoNap Name:

In this example, the AutoNap is named “My AutoNap.”

1. On the AutoNap main interface, tap the gear icon in the upper-right corner to enter the Settings page.
2. Tap Bluetooth Paired Device List to open the My Devices page.
3. Tap the AutoNap device picture/card.
4. Tap Device Name, enter a new name in the pop-up, then tap Confirm.

To delete a device:

1. Tap Bluetooth Paired Device List to enter the My Devices page.
2. Tap the red trash bin icon next to the device you wish to remove.

Bluetooth Range Detection:

• This feature is enabled by default.
• AutoNap intelligently detects vehicle status and Bluetooth distance to determine when to switch power sources.When the vehicle is off and you leave, it automatically powers the P10 from its internal battery to maintain standby without draining the car battery.

① When Leaving the Vehicle

After the P10 is paired with the AutoNap Holder Battery via the SSHub app, the system monitors both the vehicle’s voltage and the Bluetooth distance of the paired smartphone.

When the vehicle is turned off, the P10 will not go to sleep immediately. It enters sleep only after AutoNap detects that the paired phone has moved more than 6 meters away, or after about 5 minutes.

② During Short Stops

When the vehicle is parked but not turned off, even if the paired phone temporarily disconnects (for example, when the driver leaves briefly), the P10 will stay on. As long as the vehicle continues supplying power and AutoNap does not detect a voltage drop, the system will not enter sleep mode.

13.2 Wired Camera (AC-P106C25)

13.2.1 Function Overview

• The AC-P106C25 is a 1080P HD wired camera typically installed above the rear license plate to provide a real-time rear view when reversing.
• It can also be mounted inside the vehicle, such as on the inner side of the rear windshield (facing the cabin), to display the interior view in real time.
• This camera must be used with the RCAM application to enable Live Rear View and reversing display functions.

AC-P106C25 Rearview Cam App

Backup Camera

13.2.2 Installation

1. Insert the angled camera plug into the 2.5 mm port marked with the camera icon on the bottom of the P10 unit.

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

1. Route the video cable along interior panels or under trim to the installation location, keeping the wiring neat and secure.
2. Connect the red trigger wire to the positive wire of the reverse light. When reverse gear is engaged, the camera image will automatically appear on the screen.
3. To adjust camera settings, go to:

Settings App > System Settings (gear icon) > Cameras.

You can configure options such as Image Mirroring, Reverse Guidelines, and Audio Mix as needed.

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

Note: Parking Assist Lines(Reverse Guidelines) appear in the RCAM interface only when the reverse trigger is active and can be adjusted as required. Two line styles are available for selection.

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

13.3 Wireless Camera Kit (WR2-12HDLR)

13.3.1 Function Overview

The WR2 Wireless Camera kit is designed to simplify installation and provide a flexible solution for reversing, trailer monitoring, or front-view assistance.It delivers real-time wireless video to your P10 without the need for traditional signal cables.

For detailed specifications and installation instructions, scan the QR code to view the WR2-12HDLR documentation.

The WR2 system mainly includes a Wireless Backup Camera, a Wireless Video Receiver (Receiver Box), a SmartRemote, and a set of Mounting Accessories.

13.3.2 Using the WR2

1. While the P10 is powered on, use the USB-C to C cable to connect the receiver box to the lower USB-C port. A pop-up will appear asking whether to open the WRC App — tap OK to launch it.
2. Double-press the power button on the wireless camera to turn it on.

The blue indicator light will flash while pairing and stay solid once paired successfully.

Note: The WR2 camera and receiver box are pre-paired before shipment.

If they are not paired, press and hold the receiver’s WAKE/PAIR button until the blue light flashes rapidly. Then press and hold the camera’s power button until the red light appears and changes to fast blue flashing to enter pairing mode.

When pairing is successful, the blue indicator light on both the camera and the receiver will turn solid.

After Successful Pairing:

Open the WRC App on your P10. The camera feed should appear in the app.

By default, the camera operates in Power-Saving mode, and the camera feed will turn off after 2 minutes(automatically exiting the WRC interface).

Enter the WRC Interface:

• Press the receiver’s WAKE/PAIR button once to wake and enter Power-Saving View. Double-press the button within the WRC interface to switch between Power-Saving and Always-On (Mirror) Mode.
• Use the SmartRemote: press once to open or close the WRC app (Bluetooth pairing required via the system Bluetooth; device name: SmartRemote).

Note: Do not press the SmartRemote repeatedly or too quickly.

• Use voice commands via the DriveChat App (requires DriveChat login and a recorded wake word).
• When already in the WRC interface, tap the screen to wake the display.

13.3.3 WRC App Interface and Settings

The WRC App provides essential viewing and customization features for your WR2 wireless camera.

Tap anywhere on the live camera screen to display the top status bar, which shows:

• Signal Strength : Displays the current wireless signal strength as a percentage (e.g., 93%).
• Battery Status : Indicates the battery level of the camera.

Tap the gear icon in the top-left corner of the screen to access the settings menu.

Available options include:

• Flip Image: Flips the image vertically by 180°
• Mirroring: Flips the image horizontally by 180°
• Parking Guide Lines: Adjust reversing assist lines
• WDR (Wide Dynamic Range): Improve brightness balance in challenging lighting
• Hide Time: Remove time display from the screen

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

• Save Mode: Automatically enters sleep mode after 2 minutes
• Always-On Mode: Keeps the camera view always on
• Rename Cameras: Assign a role by selecting one of four presets

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

Parking Assist Lines

The WRC App provides two styles of parking assist lines to assist with reversing. Both styles offer identical adjustment parameters and can be customized based on your vehicle and camera installation position.

Style 1

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

Style 2

Image based on the 9-inch P10 model. Actual appearance may vary for other sizes.

• Vehicle Width: Adjusts the distance between the left and right lines to match your vehicle’s actual width.
• Cam Height: Sets the height of the camera from the ground, affecting line perspective.
• Mount Angle: Calibrates the camera’s vertical tilt angle.
• View Angle: Adjusts the camera’s horizontal field of view to match what’s visible on screen.
• Horizontal Shift: Moves the entire guide lines left or right to align with the vehicle’s center.
• Safety Distance: Defines the distance markers (e.g., red, yellow, green zones) to help estimate safe stopping points.

Note: Tap “Default” to restore all settings instantly.

13.4 Bluetooth OBD II Scanner(AC-4450)

13.4.1 Function Overview

The AC-4450 OBD II Bluetooth Scanner enables real-time vehicle diagnostics and performance monitoring through the Torque app.

For detailed setup and usage instructions, scan the QR code to access the AC-4450 User Manual.

13.4.2 Installation and Connection

1. Locate the OBD II Port

Find the vehicle’s OBD II diagnostic port, usually located beneath the driver’s dashboard or near the steering column.In some vehicles, it may be behind a small cover or panel.

1. Plug in the AC-4450 Scanner

Insert the scanner into the OBD II port and start the vehicle (or switch the ignition to ACC mode) to power the adapter.

The vehicle ignition must be in ON (ACC) position for communication with the ECU, but the engine does not need to be running.

1. Pair with the P10 via Bluetooth

On the P10, open Settings App > Settings (Gear Icon) > System Bluetooth.

Search for the OBD II scanner, and when prompted, enter “1234” or “0000” to complete pairing.

1. Verify Connection in Torque

Once paired, open the Torque app. In most cases, it will automatically connect to the scanner.

If not, go to Torque > Settings > OBD2 Adapter Settings, set Connection Type to Bluetooth, and select the paired AC-4450 device under Choose Bluetooth Device.

1. Start Monitoring

When the connection is established, Torque will automatically begin reading live vehicle data from the ECU.The indicator icons at the top of the Torque interface will turn blue and stay solid, indicating a successful link.

Note: DriveChat may offer additional AI-assisted features based on OBD and GPS data—such as low-fuel reminders with nearby gas station suggestions and online interpretation of OBD fault codes (DTCs). Actual features are subject to the final software release and availability.

Chapter 14 Troubleshooting

1. P10 won’t power on or keeps restarting

① Make sure you are using the original vehicle power supply,

including the car charger, power cable, and AutoNap.

② Check that the power cable is connected properly.

Be sure the P10 is powered through the POWER port.

③ Confirm that your vehicle’s power supply is stable.

If the vehicle battery voltage drops below the levels shown below,

please check or replace the battery:

Car (12V): below 11.9V

Truck (24V): below 23.2V

Low voltage may prevent the P10 from powering on or cause it to restart unexpectedly.

1. Unable to connect to CarPlay

This issue may occur if the hotspot on the P10 is already connected to another device. Please try the following steps:

① Turn off the hotspot on the P10 and try connecting CarPlay again;

② If the connection still fails, delete all previously paired Bluetooth devices on both your phone and the P10, then restart both devices and try again.

1. Screen brightness does not adjust automatically

Swipe down from the upper left side of the screen to open the quick control panel.

Check the brightness slider — if the letter “A” is not shown beside it, tap the sun icon until “A” appears. Once the “A” indicator is visible, Auto Brightness has been successfully enabled.

1. DVR cannot record video

Ensure that a Micro SD card (up to 256GB) is inserted properly.

If the issue continues, the SD card may be incompatible or damaged. Try formatting it or replace it with a new card.

1. “No SD card” message appears after inserting an SD card

The SD card may not be fully seated. Remove it and reinsert it firmly until it clicks into place.

To remove the card, press it gently — it will pop out automatically.

If the issue continues, the SD card may be corrupted. Try formatting it or replace it with a new card.

1. No emergency video is recorded

This may be caused by one of the following:

① The Park Monitor feature is turned off. Please go to DVR > Settings and enable Park Monitor.

② The G-sensor sensitivity is set too low, preventing recording from being triggered. Try increasing the sensitivity level.

1. Tapping the DriveChat icon does not trigger a response

If you have not logged in to your DriveChat account, the app will not launch.

Please complete the QR-code login for DriveChat first.

If you are already logged in but still get no response, the function may not be assigned correctly in Voice Button Shortcut.

Please check: Settings App > Settings (Gear Icon) > Voice Button Shortcut

Ensure that DriveChat is selected as the assigned function.

1. Unable to locate the vehicle using your phone

Please make sure that TrackHU is turned on, and that the GPS icon in the lower-left corner of the screen is solid, indicating that GPS is active.

1. No sound output from the P10

① If there is no sound, please check the following:

Confirm the volume level.

Make sure the volume keys on the P10 show a numeric level and the device is not muted.

② Check the current audio output mode.

Open the Audio Out app and make sure it is set to Speaker Output Mode.

For more details, refer to “10.8 Audio Output” in this manual.

Chapter 15 Technical Specifications

System Specs

• Screen Size & Resolution: 9-inch: 1280 × 720 OR 10.25-inch: 1920 × 720
• Screen Type: QLED
• Operating System: Android 13
• Processor (SoC): QC6125 Octa-core
• Memory: 8GB RAM 128GB ROM

Bluetooth:

• Bluetooth 5.0
• Supports connection to 1 phone only
• Supported Profiles: HFP, HSP, A2DP, AVRCP, PBAP
• Supports Bluetooth lock screen

Audio Output Options

• Built-in speaker
• FM Transmission
• AUX Audio Output
• Bluetooth Transmission
• CP/AA Audio Output (Audio/Video Separation)

Device Interfaces

• USB Ports: 2 × USB-C ports

Upper port: Supports USB drive media playback and file transfer

Lower port: Used for connecting the wireless camera receiver for video transmission.

• Power Input: Supports DC 12V–16V
• Camera Input: 2.5mm AV input port for external camera
• TF Card Slot: Supports Micro SD card up to 256GB
• SIM Card Slot: For inserting a Nano-SIM card

Power Supply

• Operating Voltage: 12V DC vehicle power supply
• Rated Power Consumption: 12V / 1A
• Standby Current: 12mA

Operating Conditions

• Operating Temperature: –20°C to +60°C (–4°F to 140°F)

Internet Connectivity

• Supports Wi-Fi connection to a router or mobile hotspot
• Supports Cellular Network via Physical SIM or Cloud SIM
• Supports Bluetooth tethering through system Bluetooth connection
• Supports USB tethering

CarPlay / Android Auto

• Supports wireless CarPlay and wireless Android Auto (CPAA)

Phone Mirroring

• Supports wireless screen mirroring

System Updates

• Supports OTA updates
• Supports manual firmware updates via USB drive

Parking Monitor & Impact Wake-up

• After the vehicle is turned off, the AutoNap Holder Battery provides standby power for the P10 to enable parking monitoring and impact-triggered recording.

Front & Cabin Camera

• Supports simultaneous recording in 1080P from both front-facing and in-cabin cameras.

App Expansion

• Apps can be downloaded via the built-in FindApps store or from other app stores.