You want a bigger, clearer view for maps, music, and calls—without turning your dash into a science project. FlexView Pro is ATOTO’s second-generation floating install style: a sleek glass display that rises above the dash, dials in with 9-way lockable adjustment, and then stays put. It brings the polish you expect from a modern Android car stereo while keeping your cabin tidy and OEM-friendly.
What makes FlexView Pro different?
Unlike flush-mount systems, FlexView Pro uses a long single-DIN chassis that anchors the screen and provides space for accessories, then lets you fine-tune position during installation:
●9-way Smart Adjustment: depth (+18 mm), up/down (27 mm), left/right (24 mm), swivel (±30°), tilt (±10°).
●Locks after setup: configure once to clear vents, hazard buttons, or the shifter, then tighten for rock-solid stability.
●Expandable bay: the extra DIN slot can hold the included pocket or an ATOTO power-pack amplifier (e.g., CA-AEC122D)—choose during install.
●Clean control choices: full on-screen UI, soft-touch keys, or premium physical buttons depending on the variant.
Fit note: FlexView Pro mounts in vehicles with single-DIN or double-DIN openings. With the right dash kit, it complements the look of a double-DIN car radio while delivering the flexible positioning only a floating design can offer.
The FlexView Pro family (7 variants)
10.1" Class — the everyday sweet spot (great for shoppers seeking a 10.1inch car stereo)
●SAH10DT1 — 10.1" HD touchscreen with soft-touch backlit keys for quick access.
●SAH10DT2 — 10.1" key-free panel: 100% on-screen control, zero distractions.
●SAH10DP2 — 10.1" display plus a refined row of physical, glove-friendly buttons.
Why 10.1": Wide without being overwhelming, easy to clear most dash controls with the 9-way adjustment, and a natural upgrade path for a daily-driver Android car stereo.
12.5" Class — the immersive step-up (your 12.5inch Android car stereo moment)
●SAH25DT — 12.5" bezel-less HD touchscreen, key-free, theatre-like view for maps, media, and split-screen apps.
Why 12.5": Noticeably larger canvas while remaining manageable in many cabins—just confirm dash clearance first.
12.95" Class — ultra-wide and bold
●SAH29DT — 12.95" bezel-less HD touchscreen, full on-screen control.
●SAH29DP — 12.95" display with premium physical keys for tactile control.
Why 12.95": A near-tablet visual effect with extra horizontal space for split-screen workflows; measure your dash to be sure it fits.
14.1" Flagship — go biggest, fit smart
●SAH41DT — 14.1" bezel-less HD touchscreen, key-free, maximum visual impact.
Why 14.1": The largest FlexView Pro—perfect for spacious dashboards. Because of the size, compare panel dimensions and use the full adjustment range to validate clearance.
Real-world install flow
1.Measure plan — Check distances to vents, hazard switch, climate knobs, and any trim contours.
2.Pick control style — Pure touch UI, soft-touch keys, or physical buttons.
3.Choose the extra-slot use — Pocket or ATOTO power-pack amp (e.g., CA-AEC122D). This decision is locked in once installed.
4.Mount, adjust, lock — Use the 9-way mechanism to position the screen; tighten for long-term stability.
5.Wire cleanly — The long single-DIN frame and 50 mm ultra-short body leave generous space for harnesses and optional interfaces.
Requirements: a vehicle-specific dash kit, wiring harness, and (where applicable) a data interface. The screen is not intended for frequent repositioning after installation.
Model mapping: where FlexView Pro shows up
ATOTO integrates FlexView Pro into multiple families—so you can match features and budget without compromising the look.
●SAH10DT1: A5LG110T, A6G110PF, S8G1104MS, V10G110OC
●SAH10DT2 (key-free panel): X10G110E
●SAH10DP2 (physical keys): A5LG110PT, A6G110PPF, S8G1104PMS, V10G110POC, X10G110PE
●SAH25DT (12.5"): X10G125E
●SAH29DT (12.95"): X10G129E
●SAH29DP (12.95" + physical keys): X10G129PE
●SAH41DT (14.1"): X10G141E
Coming soon: A7 and A7L series entries further expand ATOTO’s Android car stereo lineup.
FlexView Pro vs. EdgeFit: which style are you?
●Choose FlexView Pro if you want a floating display that can be positioned precisely during install, works in single-DIN or double-DIN openings, and offers different control styles.
●Choose EdgeFit if you prefer a flush-mount, “looks-like-factory” aesthetic. If you’re specifically shopping for a 9inch car stereo in a flush style, EdgeFit is the right family; FlexView Pro starts at 10.1".
Quick FAQ
Will FlexView Pro block my vents or hazard button?
That’s what the 9-way Smart Adjustment is for—set depth, height, lateral shift, swivel, and tilt during installation, then lock it down.
Can I change from pocket to amplifier later?
No. The extra DIN slot choice (pocket vs. CA-AEC122D power-pack amp) must be made during installation.
Is this compatible with a double-DIN dash?
Yes. With the correct dash kit, FlexView Pro complements the look of a double-DIN car radio while giving you floating-screen flexibility.