P6 Series User Manual

Preface

Thank you for choosing ATOTO

As an innovative brand with a decade of dedicated expertise in automotive electronics, ATOTO upholds the core philosophy of "Different. Better. Trusted.". We seamlessly integrate professional audio-visual technology, real-time connected navigation, and user-friendly interactive features to elevate every journey with refreshing experiences.

Copyright Statement

The copyright and related intellectual property rights of these manuals (including electronic and printed versions) are exclusively owned by ATOTO. Without explicit written authorization from ATOTO, no organization or individual may use the content in any form (including but not limited to copying, distributing, adapting, translating, mirroring, or reposting) for commercial purposes or provide it to third parties.

FCC Compliance Statement

The FCC Compliance Statement is an official declaration by ATOTO to users indicating that the product complies with the radio frequency interference and electromagnetic compatibility (EMC) regulations of the U.S. Federal Communications Commission (FCC). The specific statement is as follows:

This device strictly complies with all provisions of Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1.This device must not cause harmful interference;

2.This device must accept any interference received, including interference that may cause undesired operation.

Contact ATOTO Customer Support

Email: support@atotoglobal.com

Important Information

About this Manual

This manual provides information on installing, connecting, and operating the ATOTO P6 Series Portable Smart CarPlay Display. It includes an overview of key functions, as well as installation and connection guidelines, and instructions for using its features.

To make full use of your P6, please read the manual carefully before first use and refer back to it when needed. Keep it in an accessible place for future reference.

The P6 Series is a Portable Smart CarPlay Display (PSCD), hereafter referred to as “PSCD” or “P6” in this manual.

If you are unfamiliar with car electronics or lack installation experience, we strongly recommend seeking professional assistance to avoid potential injury or damage during installation.

Model Differences Notice

• On the 9-inch model, the light sensor is located at the upper left.
• On the 10.25-inch model, the light sensor is located at the upper right.

Some models provide one USB-C port on the rear panel, while others provide two USB-C ports. Please check your actual device.

The screens and features shown in this manual are for illustration only. Certain functions, such as the DriveChat app and its icon, may not be available on some models, regions, or software versions. If the interface on your device differs, please follow the actual on-device display and release notes.

Operation Warnings

Safety Instructions

• Do not open the product or the battery under any circumstances.
• For reasons of safety and security, the device must only be opened by a professional.
• No modifications of the product are permitted, any such modification leads to the loss of the operating permission.
• Damage resulting from misuse, impact, or unauthorized disassembly is not covered by the warranty.
• It is forbidden to exceed the supply voltages (Volts) specified for the mains adapter, the motor vehicle charging adapter and the product.
• Use only the charger supplied with your device. Use of another type of charger will result in malfunction and/or danger.
• Do not use the charger in a high moisture environment. Never touch the charger when your hands or feet are wet.
• Dispose of the used product or the battery according to the legal regulations in effect.
• Operating temperature: -20 °C to 70 °C (-4 °F to 158 °F)
• Always observe safe driving practices.
• Before you use your Portable Smart CarPlay Display for the first time, familiarize yourself with your device and its operation.
• Imprecise or incorrect directions may be provided due to changing traffic patterns or deviations in data.

Warning:

• Do not use sharp-edged objects on the device touch screen.
• The device is not waterproof and is not protected against water damage.
• Protect the device from extreme temperatures.

Safety Warnings and Precautions

Applications:

• This manual is applicable to ATOTO P6 Series Portable Smart CarPlay Display. Newly released models may have extra functions that are not mentioned.
• The list of accessories and the back panel may vary slightly depending on the specific model and the region of sale, but the system, UI, and product hardware information remain consistent.
• The images provided in this manual may be different from what’s displayed on the current system.
• ATOTO may release new system updates, which may include changes made or newly added functions that are not mentioned here.
• The information in this manual may be insufficient. If you have any questions or problems concerning your device that are not covered in this manual, consult customer support.

Safety Notice:

• Do not view or operate video functions while driving. Distraction from video use can lead to accidents. The manufacturer is not liable for any injuries or damages caused by driver distraction.
• Please note that our accessories—such as the ATOTO AC-44F7 Wireless Remote Control—contain button batteries. Keep them out of the reach of children to prevent accidental ingestion. If swallowed, seek immediate medical assistance. The manufacturer assumes no responsibility for incidents arising from improper handling.

Friendly Reminder:

• The screenshot images provided in this manual may be different from what’s displayed on the current system.
• ATOTO may release new system updates, which may include changes made or newly added functions that are not mentioned here.
• The information in this manual may be insufficient. If you have any questions or problems concerning your unit that are not covered in this manual, consult customer support.

What Comes in the Box

Package Contents

Your ATOTO P6 Series package includes the following items:

• P6 Portable Smart CarPlay Display
• Power Cable
• Car Charger
• AUX Cable
• USB Type-C Cable
• Metal Mount
• Holder Adapter
• Screen Protector
• Online Resources Quick Guide
• Product Care Online Support

Optional Accessories (Sold Separately)

The following accessories are available for enhanced functionality. These may not be included in all packages:

• CarbitLink 2-in-1 Cable
• AutoNap Holder Battery
• Wireless Remote Control (AC-44F7)

Product Appearance

Front Panel Overview

No.: 1

Name: Built-in Microphone

Function: It is used for Bluetooth Hands-free and Voice Commands with Noise Reduction.

Rear Panel Components & Functions

No. : 1

Name: Front / Cabin Camera

Function: Captures either the road ahead or the vehicle cabin. Only one camera can operate at a time.

No. : 2

Name: Light Sensor

Function: Built-in light sensor automatically adjusts screen brightness based on ambient light conditions.

No. : 3

Name: Holder Adapter Slot

Function: For mounting the device to the holder bracket.

No. : 4

Name: Power Button

Function: Short press to turn screen on/off. Long press for 10 seconds to reset the device to factory settings.

No. : 5

Name: USB-C Port

Function: Connect a USB flash drive for local media playback or file transfer.

*No. : 6

Name: USB-C(CarbitLink)

Function: Used for phone screen mirroring or USB tethering.

*Note: This port may not be included on all models. Please refer to the actual product you receive.

No. : 7

Name: Reset(RST)

Function: Used to restart the system in case of device freezing or malfunction.

No. : 8

Name: TF Card Slot

Function: Insert a Micro SD card to expand storage(Up to 256GB).

No. : 9

Name: External Camera Input

Function: Supports a wired camera, which can be used for reversing or in-cabin monitoring depending on the installation location.

No. : 10

Name: Power Input

Function: Connect to external power source. Supports DC 12V–16V input. Please use the original power cable.

Note:

1. This PSCD supports a front/cabin camera, which is sold separately as an optional accessory.
2. Port No.6 is dedicated to CarbitLink. It only works with the CarbitLink 2-in-1 Cable and is not compatible with standard USB-C cables.

Installation and Power Connection

Installing the PSCD onto the Mounting Bracket

Note:

• Never mount your PSCD where the driver's field of vision is blocked.
• Please mount your PSCD where there is a "clear area"—usually just beneath the rear-view mirror.
• The screen angle can be adjusted up, down, left, and right by first loosening the lock ring. After adjusting to the desired angle, tighten the lock ring securely.

Choose Your Installation Style

CAUTION:

• Before removing the adhesive backing, test the mounting position and adjust the bracket angle based on your dashboard layout and viewing preferences.
• For better adhesion, clean the mounting surface with alcohol or a cleaning wipe before applying the adhesive. This helps ensure a secure and long-lasting bond.
• Once applied, it's difficult to reposition — so take a moment to find the spot that works best for you.
• After adjusting the mount to the desired angle, tighten all hex screws to ensure stability.

Power Connection

Note: For certain models, AutoNap is not included and must be purchased separately.

AutoNap is a smart power device designed for PSCDs and other car electronics—cup holder–friendly, battery-powered, and ready to wake your PSCD instantly, without messy wiring or fuse tapping.

Home Screen

1.Home Screen Layout

After connecting power, the  PSCD lights up. Familiarize yourself with the icons and menus for easier navigation.

Area：A

Name：Status & Control Panel

Description: This area displays information such as volume, and time. 

Swipe down from the upper-right corner to open the control panel. Swipe down again within the panel to access brightness settings.

Area：B

Name：Flexible Home Layout

Description: Customize the layout by replacing app shortcuts and functional modules such as Music or Navigation.

Area：C

Name：Shortcut Bar

Description: On the home screen, it offers quick-access shortcuts to frequently used functions, allowing you to effortlessly control the system and launch your desired applications.

Area：D

Name：Apps

Description: Tap this button to enter App list.

Top Shortcuts on Home Screen

No.: 1

Icon Name: Home

Description: Tap to return to the homepage.

No.: 2

Icon Name: Multitasking Mode

Description: Tap to view all recently used apps.

No.: 3

Icon Name: Screen Off 

Description: Tap to turn off the screen. Tap again to wake it up.

No.: 4

Icon Name: DriveChat

Description: Tap to start a voice conversation.

Control Panel

No.: 1

Icon Name: Brightness Adjustment Bar

Description: Tap or drag to adjust the screen brightness.

No.: 2

Icon Name: Wi-Fi

Description: Tap to enable Wi-Fi; Press and hold to access Wi-Fi Settings.

No.: 3

Icon Name: Bluetooth 

Description: Press and hold to access Bluetooth settings. Used for phone connection, music, calls, lock screen etc.

No.: 4

Icon Name: Clean 

Description: Tap to free system memory and speed up the system.

No.: 5

Icon Name: Settings

Description: Tap to access system settings.

No.: 6

Icon Name: Restart

Description: Tap to restart the system.

No.: 7

Icon Name: Light/Dark Mode

Description: Switch between Day and Night display modes for better visibility and comfort.

Note: When swiping down in the right part of the screen, you can open the status bar to check message notifications and ensure you receive information.

Album & Wallpaper

Wallpaper

There are three methods to set wallpaper

Method 1: From Gallery

1. Open "Gallery".

1. Select your desired image.
2. Tap the three-dot menu (≡) in the top right corner and select “Set picture as”.

Method 2: Settings> Display > Wallpaper

1）Go to Settings > Display > Wallpaper, or long-press on the home screen and tap Wallpapers.

2)Choose a system wallpaper or select a custom image from Gallery.

Method 3: From the Home Screen

1. Touch and hold an empty area on the home screen, and tap “Wallpapers”. Or you can tap the center blank area of the bottom Shortcut Bar to access the wallpaper settings.

2)Wallpapers: Tap to browse and select from built-in wallpapers. After choosing one, tap Set wallpaper in the top-left corner.

Gallery: Tap to select a custom image from your gallery. The steps are the same as in Method 1.

Copy images from the USB Storage Device to your device

1. Insert the USB drive into the PSCD’s USB-C port. If needed, use a USB adapter cable.
2. Open the “File Manager” app.

1. Select the USB.

4)Select the image(s) or folder(s) you want, then tap "Copy" or "Cut". Navigate to the desired location and tap "Paste" to copy or move them to the HD's internal storage.

Tip: Remember the folder name for easy access later.

Important Note:

The operation for copying files between the PSCD and a USB drive is the same—you just need to switch the source and destination depending on which direction you're transferring.

Bluetooth Connection

Bluetooth Functionality

• Music playback
• Hands-free calls
• Auto unlock and lock for privacy via the screen lock feature
• Connect to devices like OBD diagnostic tools, keyboards, mice, and gamepads

Note: Please note potential compatibility issues with specific devices.

Bluetooth Connection Methods

1.Via BT Phone

Tap the BT Phone icon, then tap the Bluetooth icon to enter the Bluetooth settings interface.

2.Via BT Music

Tap BT Music, then tap" CLICK TO BIND" to access the Bluetooth settings interface.

3.Via Settings

Go to Settings > Bluetooth to enter the Bluetooth settings interface.

All three methods will take you to the same Bluetooth interface, where you can complete device pairing.

Bluetooth Pairing

Enable Bluetooth: Turn on Bluetooth in the settings interface.

You can search for the PSCD’s Device name in your phone's Bluetooth settings and initiate pairing. Or vice versa. A pairing request will appear on your phone. Tap Pair, Trust, or Allow, depending on your phone model and system version, to complete the connection.

Note: The pairing prompt may vary slightly depending on your phone brand and operating system.

Once paired, the device will appear in the "Paired Bluetooth device" list for future connections.

When Media audio is turned off on your phone, the PSCD will show "Connected (no media)", indicating no audio is being streamed.

4.Connection Preferences

No.: 1

Name: Device name

Description: Shows the PSCD's name for pairing. Tap to rename.

No.: 2

Name: Auto connect

Description: When enabled, connects automatically to previously paired devices within range.

No.: 3

Name: Auto answer

Description: Calls are automatically answered after 2 seconds of ringing.

Bluetooth Screen Lock

Enable this option(Bluetooth lock screen) to lock or unlock the screen based on the connection status of a specific Bluetooth device.

Tap "Unlock device use bluetooth" to turn on the function.

Tap the Bluetooth icon. This will expand a list of previously connected devices. Select the one you want to use for screen locking.

Note: If your device is not listed, please pair it with the PSCD first via the Bluetooth settings.

Password Setup for Bluetooth Lock

When enabling the Bluetooth screen lock function, you will need to set an unlock password:

1. Refer to the "Default password" displayed on the right side (e.g., 0123).
2. Enter the current password (e.g., 0123).
3. Enter and confirm your new password to complete the setup.

Note: If you do not set a password, the screen lock will display the Default password (e.g., 0123),

which is visible to others.

If you forget your password and are unable to access the PSCD interface—and all other unlocking methods have failed—you can perform a factory reset:

Press and hold the power button on the back of the device for 10 seconds to initiate a factory reset.

Performing a factory reset will erase all user data and personal settings. This action is irreversible. Please proceed with caution.

Connecting Bluetooth Accessories

It can connect to Bluetooth-enabled devices like OBD diagnostic tools, keyboards, mice, and gamepads

1.General Bluetooth Accessories

For most Bluetooth devices—such as OBD diagnostic tools, game controllers, keyboards, or mice—simply enable Bluetooth on the PSCD, search for the device name, and tap to connect.

2.Interior Footwell Lights

To use the Interior Footwell Lights, open the pre-installed LumiAuto app on the PSCD.

Tap "Search for Devices" to begin scanning, and select the device to connect.

Make sure Bluetooth is enabled on the PSCD before connecting.

If Bluetooth is turned off, the system will prompt you to enable it before proceeding.

CarPlay/Android Auto

Note：The P6 series supports only wireless CarPlay and wireless Android Auto.

Compatibility

Wireless CarPlay is available on iPhone 5 and later models with iOS 9.0 and higher.

Wireless Android Auto is compatible with these Android versions:

1. Any phone with Android 11.0 and higher.
2. A Google or Samsung phone with Android 10.0.
3. A Samsung Galaxy S8, Galaxy S8+, or Note 8, with Android 9.0.

ApplyPlay/Android Auto App

Before connecting, you can open “ApplyPlay/Android Auto” app and tap “Settings” icon at the bottom right corner:

• Software upgrades: Check for system updates to improve stability, fix bugs, and access new features.
• Switch to right-hand drive: Adjusts the user interface layout for vehicles with the steering wheel on the right side.
• Connect automatically: Enable ApplyPlay or Android Auto to start automatically when the device connects via Bluetooth.

Apple CarPlay Connection

1. On the PSCD, open the ApplyPlay app and turn on Bluetooth.
2. On your iPhone, enable Bluetooth and search for the PSCD device name to pair. When a pairing request appears on your iPhone, tap Pair and Allow. Then, a "Connect to CarPlay" prompt will appear — tap Connect.

If the "Connect to CarPlay" prompt does not appear:

1. Go to Settings > General > CarPlay on your iPhone and enable CarPlay.

1. When the PSCD device name appears, tap it — a pairing request will appear, tap Pair.

1. The "Connect to CarPlay" prompt will then appear — tap Connect to complete the connection.

1. Once connected, the PSCD will display your phone’s apps within the ApplyPlay interface.

[Images for reference only. Available apps may vary by device.]

Android Auto Connection

Wireless Android Auto Connection Steps:

1. On the PSCD, turn on Bluetooth.
2. On your phone, turn on Bluetooth, search for the PSCD device name, and pair successfully.
3. After pairing, open the Android Auto app on the PSCD.

Note:

• If you are using wireless Android Auto on your phone for the first time, make sure that the wireless Android Auto option or wireless projection option is on.
• It is recommended to turn on Wi-Fi, but do not connect to any network.

Phone Mirroring

Wired Mirroring Connection

1. Your phone must have the CarbitLink app installed.

1. Using the CarbitLink 2-in-1 Cable, connect your phone to the USB-C (CarbitLink) port on the rear of the PSCD.
2. Open the CarbitLink app on the PSCD.
3. If necessary, open the CarbitLink app on your phone manually.

Note: A QR code for app download is provided on the CarbitLink interface of the PSCD.

Wireless Mirroring Connection

1. Ensure that both the PSCD and your phone are connected to the same local network.

- You can either connect the PSCD to your phone’s hotspot, or

- Connect both devices to the same Wi-Fi network.

1. Open the CarbitLink app on the PSCD.

- If necessary, you can also open the app on your phone.

Note:

• For certain functions, such as phone calls, Bluetooth connection is required.
• For iPhone users: You need to open the Screen Mirroring function on your iPhone and select the PSCD device to connect.

Internet Connectivity Options

Wi-Fi Connection

Connect the P6 to your phone’s Wi-Fi hotspot or to another available Wi-Fi network to access the internet.

1. Use your smartphone or a portable router to create a Wi-Fi hotspot
2. On the PSCD, go to Settings > Network >Wi-Fi

1. Turn on Wi-Fi, then select your Wi-Fi network name from the list of available networks

USB Tethering

1. Use the CarbitLink 2-in-1 Cable to connect your phone to the USB-C (CarbitLink) port on the PSCD.
2. Open the CarbitLink app on both devices. Once connected, the PSCD can access the internet via your phone.

Note:

• Make sure to use the correct USB-C (CarbitLink) port on the rear of the PSCD.
• Some phones may also require you to enable “USB Tethering” (USB internet sharing) in the phone’s settings.

Apps

App Overview

To ensure system stability and a consistent user experience, the P6 adopts a closed system architecture. App downloads and updates are only supported through the built-in FindApps platform. If you cannot find the app you need, you may leave a suggestion within FindApps. We will continue expanding the available app options based on user feedback.

The system includes several built-in apps that support various functions such as voice interaction, vehicle tracking, accessory control, and video recording. Notable examples include:

• DriveChat: An AI-based voice assistant that supports voice commands, online Q&A, and weather information.
• TrackHU: A GPS-based vehicle tracking app that supports viewing driving history and setting up geofences.
• FindApps: The official app management platform for downloading, installing, and updating supported applications.
• LumiAuto: Controls ATOTO ambient lighting accessories via BLE; currently supports in-app control only.
• DVR: Records video from either the front-facing or in-cabin camera while driving; only one camera can be used at a time.
• RCAM: Enables video display from wired backup cameras
• Web Resources: A factory utility for scanning and uploading device hardware/software data to assist with after-sales service and product traceability.
• System Update: Keeps your P6 system up to date with improvements such as UI enhancements, feature additions, and bug fixes.

DriveChat(AI Assistant)

DriveChat is an innovative application powered by SSHub and ChatGPT that enables voice-based conversations with various AI bots on your PSCD.

Note: This application is model-dependent and may not be available on all devices.

Sign In to SSHub

Download the SSHub app from the App Store or Google Play Store, then open it and create an account or log in with a third-party account.

Add Device and Start Chatting

1. On the PSCD, open the DriveChat app, tap the "AGREE" button.

1. In the SSHub app, tap "Scan Now" to scan the QR code displayed in the DriveChat app on your PSCD, then tap "Finish". You can set your preferred device name to make it easy to find on the SSHub app.

Note: The actual interface may vary depending on the latest version of the SSHub app. The following screenshots are provided for reference only.

1. After tapping the DriveChat icon, the main interface will appear. Tap "Chatbot" in the bottom menu to select your preferred AI model, such as Adventure Story Time, Critical Thinker, and others.

1. After logging in via QR code, the DriveChat interface will appear as shown.

1. You can check for app updates by tapping "About" in the menu.

1. For future use, simply tap the DriveChat icon in the top-left status bar to start a voice conversation.

A DriveChat listening bubble will appear on the screen.

How to Use DriveChat

In the SSHub app, tap the DriveChat app, then tap Chatbot and choose your preferred chatbot to engage with an intelligent assistant that offers actionable insights for resolving complex issues and making informed decisions.

Note:

• Response time may vary based on network conditions.
• Both the DriveChat and SSHub apps are periodically updated; please refer to the latest version for current instructions.

TrackHU

TrackHU is designed to streamline how you locate your car. It offers the following features:

• Real-time tracking on a map
• Alerts and geofence settings
• Access to analytics
• Historical data on speed and distance
• 24/7 vehicle security

Activate TrackHU by enabling GPS and network connectivity on your PSCD, then scan the head unit's QR code to access the TrackHU Manager for comprehensive tracking information.

Note:

• Ensure your PSCD’s GPS and network are enabled to receive notifications via email and to access tracking data in the TrackHU Manager APP or website.
• lf your PSCD loses internet connectivity, the tracking data will be stored locally and automatically uploaded to the server once the connection is restored.

Activate and Link TrackHU

Note: The TrackHU APP icon is hidden by default to protect your privacy. To show or hide the app, go to Settings > About device, scroll down to "Android version", and tap it 4 times quickly.

“TrackHU icon is now visible” or “TrackHU icon is now hidden”, depending on the current status.

Follow the steps below to activate TrackHU and connect your PSCD to the TrackHU Manager.

1. Open the TrackHU app.
2. Tap the button 1 to enable TrackHU. You will see the network and GPS status at the left corner 2.

1. Give us some suggestions by tapping 3.
2. Scan the QR code to enter the TrackHU Manager website on the phone.

The QR code will expire in 5 minutes and you can refresh the QR code by tapping the Refresh button or exiting the TrackHU and entering again.

1. Register with your email address on the TrackHU Manager website and log in

1. You can assign a name to the device. After that, tap the Map button, then tap the Settings icon in the top-left corner to view the named device (such as JORDAN’s X10 — example only).
2. When you see the named device is in the “online” status in seconds, tap the device name to see its location, past route, and more information.

FindApps

FindApps is an exclusive app store designed specifically for our Android devices. We are dedicated to enriching your driving experience with a wide array of software options. Unlike the general offerings of the Google Play Store, FindApps ensures that all available applications are fully compatible with ATOTO PSCDs.

How to Use FindApps

1. Go to Apps, tap FindApps.
2. On the App page, scroll through the list to find the app you want to install, then tap Install > Retrieve.

On the Manage page, scroll through the list to find the app you want to uninstall, manage, or update, and proceed with the desired action.

Note: P6 is designed as a closed system to ensure stability and compatibility. Apps can be downloaded or updated through the FindApps platform, which includes both official and selected third-party apps verified for this device.

LumiAuto

To elevate the driving ambiance, we recommend pairing your PSCD with our ATOTO CI-FLT01 Interior Footwell Lights (sold separately). Customize your vehicle’s interior lighting with a range of modes for different moods.

Please refer to our separate CI-FLT01 User Manual on the Eproductcare website for further details.

Go to Eproductcare > More > Footwell Light Kits > CI-FLT01.

Connect Footwell Lights

To use the Interior Footwell Lights, open the LumiAuto app on the PSCD.

Tap "Search for Devices" to begin scanning. Tap "Search for Devices" to begin scanning. When your Footwell Light’s device name appears, tap "Connect" to pair it with the app.

Once connected, you can use the LumiAuto app to control lighting color, mode, brightness, and other effects.

Audio Output

This device supports four audio output modes. Users can choose how the PSCD's audio is played—either through the car stereo or the device itself. There are two ways to access the audio output settings:

– via the “Audio Out” app, or

– by tapping the audio output icon on the home screen.

Tapping a mode icon will immediately activate the corresponding output mode.

1. FM Transmission Mode

The PSCD can transmit audio to the car stereo via FM frequency. To set up:

① Tap the to enter FM transmission mode.

② Select an unused FM frequency (e.g., 86.7 MHz).

③ Tune your car stereo to the same frequency (e.g., 86.7 MHz).

Once set, the audio from the PSCD will play through your car stereo.

Tip: Choose a frequency without local FM broadcasts to avoid interference and ensure better audio quality.

1. AUX Output Mode

This mode enables wired audio playback from the PSCD to the car stereo using an AUX cable.

To use this mode:

① Tap the to enter AUX output mode.

② Connect one end of the AUX cable to the “AUX OUT” port on the Cigarette Lighter Power Adapter

③ Connect the other end to the car stereo’s “AUX IN” port;

④ Switch the car stereo to AUX input mode (you may need to launch the AUX IN app or manually select the input, depending on your stereo).

1. PSCD Speaker Output Mode

Tap the to enter Device Output Mode. In this mode, audio is played through the PSCD’s built-in speaker.

1. CarPlay / Android Auto (CP/AA) Output Mode

Before using this mode, please ensure your smartphone is already connected to the PSCD via CarPlay or Android Auto.

① Tap the to enter CP/AA Output Mode. In this mode, the system enters an audio-video split state: visuals are displayed on the PSCD, while audio is played from the smartphone.

② To redirect audio to your car stereo, pair the smartphone with the car stereo via Bluetooth. Some stereos may require manually enabling “BT Music” or “Bluetooth Audio” mode to receive the sound.

DVR

The P6 supports DVR functionality. With an external SD card inserted, you can record video using the front/cabin camera (if included in your package). Only one camera can be used for recording at a time.

DVR Interface

Tap DVR to enter the interface.

No. : 1

Name: Record button

Function: Tap the Record button to start or stop recording.

No. : 2

Name: Camera Switching

Function: Switch between Cabin Camera and Front Camera for in-vehicle or forward-facing recording.

No. : 3

Name: Menu

Function: To view and manage recorded videos and photos, lock/unlock files, delete files, or browse files by calendar.

No. : 4

Name: Photo Capture

Function: To capture images. Photo capture may not be available during certain recording states.

No. : 5

Name: Mute

Function: Tap once to mute. Tap again to restore sound.

No. : 6

Name: Video Lock/Unlock

Function: Tap to switch to the Lock icon and start recording.

Tap the Lock icon again to unlock.

To stop recording, tap the Record button.

No. : 7

Name: Settings

Function: Configure G-Sensor sensitivity, Parking monitor, Speed unit, Record loop time, and other settings.

DVR Menu

Tap the menu button to access options for editing videos or photos.

No. : 1

Name: Front Camera

Description: Videos or photos captured by the front camera.

No. : 2

Name: Cabin Camera

Description: Videos or photos captured by the in-vehicle (Cabin) camera.

No. : 3

Name: Edit

Description: Delete, lock, or unlock videos or photos..

No. : 4

Name: Calendar

Description: Browse recordings by date. Dates with a red dot indicate available recordings.

Category：A

Name：Recorded Videos

Description: All video recordings.

Category：B

Name：Gallery

Description: All captured photos.

Category：C

Name：Locked Videos

Description: Emergency videos saved automatically or manually.

[ Edit Mode ]

[ Calendar View Mode ]

DVR Settings

Tap the settings icon to configure options such as G-Sensor sensitivity, parking monitor, and recording loop.

G-sensor

Automatically triggers an emergency recording and saves the footage when a collision or strong vibration is detected, preventing important clips from being overwritten.

Sensitivity can be set to Low / Middle / High. This feature must be enabled to take effect.

Park monitor

When the vehicle is parked and powered off, the device will automatically record if unusual vibration or impact is detected, capturing important evidence while you are away.

Parking monitor works only when enabled.

Speed unit

Set the speed display unit to kilometers per hour (KM/H) or miles per hour (MPH).

Record loop time

Video is saved in segments of 1, 3, or 5 minutes.

Event record time

Sets the duration for emergency event recordings (triggered by G-Sensor or Parking Monitor) to 30 seconds, 1 minute, or 3 minutes.

Format SD card

Clears the SD card to prepare for new DVR recordings.

Note: Locked videos will not be overwritten. When storage is full, the system will overwrite unlocked videos first. If only locked videos remain, a "Storage Full" warning will appear.

RCAM

Displays video from a wired backup camera in real time. Requires connection via the 2.5mm External Camera Input on the back of the PSCD. Compatible with supported external cameras only.

Note: The system is not compatible with third-party cameras.

Navigation

This app serves only as a shortcut and is not a navigation application itself. You can choose your preferred app in the Settings menu. Once configured, tapping this app will launch the selected application directly.

For detailed steps, please refer to “Navigation” under General Setting.

System Update

We may release new system updates that include improvements or newly added features. Updates can be downloaded and installed online through the app.

1. Tap System Update to check for available software updates.

1. Tap Download to complete the update.

General Setting

Network

For details on connecting your PSCD to the internet, please refer to the" Wi-Fi Connection" section.

Bluetooth

For details on configuring Bluetooth, please refer to the “Bluetooth Connection” section.

Sound

Tap Settings> Sound

Set the volume levels of different modules to ensure that you can hear key information clearly while multitasking.

Adjust the "Reverse Volume" to control how much the media volume is reduced when reversing:

• 0%: Media volume will be completely muted while reversing.
• 100%: Media volume remains unchanged during reversing, just like normal playback.

Tap the speaker icon in the top-right corner to drag the volume bar and quickly adjust the volume.

Display

Tap Settings> Display

Home Style: Choose between two available home screen styles to suit your preference.

Boot Logo: Choose between the "ATOTO" logo and the generic "Android" logo as your startup screen.

Wallpaper: To change the wallpaper, please refer to the “Album & Wallpaper” section under Home Screen.

Restore the default wallpaper: Tap this option to revert the wallpaper to the factory default.

Auto Brightness:

When enabled, the screen brightness will adjust automatically based on the ambient light.

Battery Level Display of the AutoNap:

When the PSCD is connected to the AutoNap (a smart cupholder-style power hub), enabling this option displays its remaining battery level on screen.

Assistive Touch:

Enable this option to display a floating control icon on the screen for quick access to functions such as Return, Home, Volume Up, and Volume Down.

Navigation

Tap Settings> Navigation

Navigation:

Tap to view a list of available apps. Select one as a shortcut. Once set, tapping the “Navigation” APP icon will launch your chosen app directly.

Mix proportion:

Adjust the audio mixing ratio between navigation voice prompts and media playback

0%: Media volume is completely muted during navigation prompts.

100%: Media volume remains unchanged during navigation prompts.

GNSS test:

Test and display the GNSS (Global Navigation Satellite System) reception status and positioning accuracy of the PSCD.

Start navigation app while boot:

After setting a shortcut app, enable this option to launch it automatically when the PSCD powers on.

Note:

The “Navigation” APP serves as a customizable shortcut and does not refer to a GPS navigation app by default.

Languages & Input

1）Change System Language

Tap Settings> Languages & Input> Languages>Add a language

The system supports multiple languages. After adding your desired language, drag it to the top of the list to switch the system interface to that language.

2）On-screen keyboard

The PSCD features a built-in on-screen keyboard that supports multilingual input and voice typing for user convenience.

Date & Time

Tap Settings > Date & Time

1. After setting the time zone, enable Automatic time calibration to adjust the time automatically.

1. Select your preferred time format

Other Settings

Accounts:

1. Used to add accounts such as Google or DriveChat.
2. It is recommended to enable Automatically sync app data, which allows apps to automatically refresh and sync data in the background to keep information up to date.

System:

1. System reboot: Reboot the device.
2. System updates: This function is not available to users. To update the system, please use the dedicated System Update app on the main screen. To ensure system stability and prevent accidental operations, system updates are managed through a separate application.
3. Erase all data (factory reset): This will erase all data from the device. Use with caution. This action is irreversible.

Apps:

Manage installed applications, including permission settings such as access to location, call logs, and more.

Google:

Manage your Google account and related services.

Factory Mode:

This mode is for internal testing and is password-protected. It is not intended for user access.

About device:

View device information such as model number, Android version, and system status.

Troubleshooting

1. PSCD won’t power on or keeps restarting

① Make sure you are using the original vehicle power supply,

including the cigarette lighter, power cable, and optional AutoNap (if purchased separately).

② Check that the power cable is connected properly.

Be sure the PSCD is powered through the POWER port.

③ Confirm that your vehicle’s power supply is stable.

If the vehicle battery voltage drops below the levels shown below, please check or replace the battery:

Car (12V): below 11.9V

Truck (24V): below 23.2V

Low voltage may prevent the PSCD from powering on or cause it to restart unexpectedly.

1. Unable to connect to CarPlay

This issue may occur if the hotspot on the PSCD is already connected to another device. Please try the following steps:

① Turn off the hotspot on the PSCD and try connecting CarPlay again;

② If the connection still fails, delete all previously paired Bluetooth devices on both your phone and the PSCD, then restart both devices and try again.

1. Wired CarbitLink connection fails to mirror screen or access the internet on the PSCD

This issue may be caused by using the wrong USB-C port on the PSCD.

Please ensure that the CarbitLink 2-in-1 Cable is connected to the correct USB-C port — the one located next to the RST button, which supports data transmission.

1. Screen brightness does not adjust automatically when ambient light changes

This may be caused by the Auto Brightness feature being turned off. Please go to Settings > Display and make sure Auto Brightness is enabled.

1. DVR cannot record video

This may be caused by the SD card being full.

Please try formatting the SD card or replacing it with a new one.

1. “No SD card” message appears after inserting an SD card

This may be caused by incorrect insertion of the SD card.

Please insert the card according to the orientation guide printed on the device.

To remove the card, simply press it gently — it will pop out automatically.

If the issue persists, the SD card may be damaged. Try replacing it with a new card.

1. No emergency video is recorded

This may be caused by one of the following:

① The Park Monitor feature is turned off. Please go to DVR > Settings and enable Park Monitor.

② The G-sensor sensitivity is set too low, preventing recording from being triggered. Try increasing the sensitivity level.

1. Tapping the DriveChat icon does not trigger a response

This may be caused by an unstable network connection, which prevents voice activation from working properly.

Please check your internet connection and try again.

1. Unable to locate the vehicle using your phone

Please make sure that TrackHU is turned on, and that the GPS icon in the lower-left corner of the screen is solid, indicating that GPS is active.

1. No sound output from the PSCD

Please check whether the current audio output mode is set to Play on Device. For more information, refer to the Audio Output section under Apps.

Technical Specifications

System Specs

• Screen Size: 9 inches
• Screen Type & Resolution: QLED, 1280×720
• Operating System: Android 11
• Processor (SoC): RK3326S Quad-core Cortex-A35
• Memory: 2GB RAM 32GB ROM

Bluetooth:

• Bluetooth 5.0
• Supports connection to 1 phone only
• Supported Profiles: HFP, HSP, A2DP, AVRCP, PBAP
• Supports Bluetooth lock screen

Audio Output Options

• Built-in speaker
• FM Transmission
• AUX audio output

Device Interfaces

• USB Data Ports: 2 × USB-C ports

Upper port: Supports USB drive media playback and file transfer

Lower port: Used for CarbitLink phone mirroring / network sharing

• Power Input: Supports DC 12V–16V
• Camera Input: 2.5mm AV input port for external camera
• TF Card Slot: Supports Micro SD card up to 256GB

Power Supply

• Operating Voltage: 12V DC vehicle power supply
• Rated Power Consumption: 12V / 1A
• Standby Current: 5mA

Operating Conditions

• Operating Temperature: -20°C to +70°C (-4℉ to 158℉)

Internet Connectivity

• Supports Wi-Fi connection to a router or mobile hotspot
• Supports USB tethering via the CarbitLink 2-in-1 Cable

(requires launching the CarbitLink app; uses phone’s cellular data).

CarPlay / Android Auto

• Supports wireless CarPlay and wireless Android Auto (CPAA)

Phone Mirroring

• Supports both wired and wireless screen mirroring

System Updates

• Supports OTA updates
• Supports manual firmware updates via USB drive

Parking Monitor & Collision Wake-up

• When the vehicle is turned off, the built-in G-sensor detects collision or vibration to wake the device and start recording
• When used with the optional AutoNap Holder Battery extended parking surveillance is supported (video only)

● Supports ACC control (automatically wakes with ignition)

● Up to 5 days standby in static conditions (actual time varies based on impact frequency and battery capacity)

Front / Cabin Camera (if equipped)

• Records in 720P; supports either front-facing or in-cabin recording (one at a time)

App Expansion

• Apps can be downloaded via the built-in FindApps store
• Does not support manual installation of third-party APKs