Best partner for ATOTO car stereos - CA- AEC01 Amplifier

ATOTO, dedicated to the field of car stereos for 7 years, has created a variety of popular and well-made car stereo series. To offer our loyal customers a better in-car audio experience, a much more powerful external amplifier CA-AEC01 is launched. As a complete solution, there will be no compatibility issues.

Compatibility: This power supply is specially designed for selected ATOTO car stereos. Detailed compatibility information is listed below.

Only with ATOTO car stereos with installation styles of:

1. UDH07D (including but not limited to A6G2A7PF, A6G2B7PF, A6G2C7PF, F7G2A7SE, F7G2A7XE, S8G2A74SD, S8G2A78UL, S8G2A79UP)
2. WUDH07D (including but not limited to F7TYC7SE, F7TYC7XE, S8TYC74PM)
3. SAH08D/SAH10D (including but not limited to F7G1A8PE, F7G1A8XE, F7G110XE, S8G1A84SD)
4. IAH09D/IAH10D (including but not limited to A6G209PF, F7G211SE, F7G211XE, S8G2114PM, S8G2119UP, S8G2113LT)

Important:

1. The models listed here are not complete. Refer to the installation manual included in the main unit's package for the installation style.
2. NOT COMPATIBLE with ATOTO A6Y, A6G2A7KL, YS102SL. NOT COMPATIBLE with head units of other brands.
3. NOT COMPATIBLE with 7-inch head units with a long frame like F7G2B7PE, S8G2B74PM. NOT COMPATIBLE with the F7 WE series like F7G2A7WE, F7G2B7WE, F7G2C7WE, F7G211WE.
4. NOT COMPATIBLE with vehicle-specific models for Volkswagen like A6VW09PF or S8VW114SD.

More power for your money:

Its 4-channel amplifier outputs Power maximum 60 W and 47 W RMS per channel when connected to four 4 Ω speakers (for most cars). It uses the Dynamic Maximum Power Management by ATOTO (DMPM) to provide a rapid boost of power when necessary, virtually doubling the output power of the amplifier on music peaks. Greatly enhances your audio experience by offering twice the power of the original built-in amplifier.

No matter when you go from home to work at normal speed or drive at highway speed, you can relax and enjoy the music without noticing the annoying noise outside. The car radio and amplifier together create a powerful audio system rich in features that you will enjoy for many miles.

Set your amplifier right here.

Disadvantage of third-party amplifiers.

1. You need to find a place to set the third-party amplifier.

If you choose to place the amplifier in the trunk area, you have to finagle from the car radio to the spot near the rear speaker using many long patch cables, which is time-consuming and exhausting. The area under the dashboard seems closer, but the remaining space is tight after installing the amplifier and it will suffer from dirt and spills in the long term.

2. Wiring issues lead to possible interference.

There might be wiring and grounding issues when trying to put together many long cables to reach the third-party amplifier, which will cause annoying noise .

3. Amplifier power is hindered by long patch cables.

Long cables will increase resistance, thus causing greater loss of amplifier power .

Advantage of the ATOTO amplifier.

1. Easy to set up the amplifier.

CA-AEC01 measures only 142 mm x 103 mm x 41 mm (L x W x H). The combined depth of the car stereo and the ATOTO amplifier is still less than 160 mm , so it fits a wide variety of vehicles with a double DIN dashboard opening.So no need to worry about where to put your external amplifier, the ATOTO CA-AEC01 amplifier will hide in the dashboard opening and leave your car clean and tidy.

2. Quick installation:

Thanks to the efficient power requirements of the DMPM technology , the CA-AEC01 does not require a new power cable to the battery, so the installation is fast using the supplied car radio power cables. Additionally, the CA-AEC01 employs a 20PIN power wiring with a recessed design on one side, so that the cable can be easily stowed for a cleaner and less cumbersome installation . For A6 PF and S8 LT car radios with 16 PIN power wiring, we also prepare a 16PIN-20PIN wiring for easy installation.

3. Clean sounds:

With the integrated line-out converters in the external amplifier, you can connect the amplifier to the car radio directly from the speaker level output, saving you the stress of buying another line-out converter. The original wiring we provided is easy to connect and avoids feedback and noise issues due to improper wiring or grounding during the installation of third-party amplifiers. Furthermore, it is a full-range amplifier that covers the range from 20 Hz to about 20 kHz.Regardless of whether your speakers output low, mid, or high frequencies, the amplifier can work well with them.