EIOTCLUB and DataGo provide convenient mobile data connectivity solutions for compatible devices. Before using either service for the first time, you will need to complete the required activation process and purchase a data plan.
This guide explains how to activate and use EIOTCLUB and DataGo, including SIM card installation, account activation, data plan purchase, and mobile data setup.
EIOTCLUB & DataGo Overview
EIOTCLUB
EIOTCLUB requires a physical SIM card to be inserted into your device.
After installing the SIM card, you will need to download the EIOTCLUB app, create an account, activate the required eSIM profile, and confirm that your device is connected to the network.
DataGo
DataGo uses the built-in SIM card in the supported in-vehicle device.
To get started, simply register and activate your account, purchase a data plan, and enable mobile data from the DataGo app.
|
EIOTCLUB |
DataGo |
|
|
|
|
A physical SIM card needs to be inserted to use. |
Register an account and activate the device to use it. |
How to Activate and Use EIOTCLUB
Before using EIOTCLUB for the first time, follow these steps to activate your account and set up your mobile data service.
Step 1: Insert the Physical SIM Card
Insert the EIOTCLUB physical SIM card into your device.
If necessary, restart the device after inserting the SIM card to ensure that it is properly detected.
Step 2: Download and Register the EIOTCLUB App
Download the EIOTCLUB app from your device's app store.
Open the app and follow the on-screen instructions to create and register your account.
Step 3: Select and Activate Your eSIM Profile
In the EIOTCLUB app, select the eSIM profile you need and complete the activation process according to the instructions provided in the app.
Step 4: Check Your Network Connection
After activation, check the network status on your device.
If the device shows a normal network connection, your EIOTCLUB service is ready to use.
EIOTCLUB Activation Tutorial
For additional guidance, refer to the EIOTCLUB activation tutorial provided with your device or service.
How to Activate and Use DataGo
Before using DataGo for the first time, you need to activate your account and purchase a mobile data plan.
Follow these steps:
Step 1: Open the DataGo App
Open the DataGo app on your in-vehicle device.
Step 2: Scan the QR Code
A QR code will appear on the DataGo app home screen.
Use your smartphone's browser to scan the QR code.
Step 3: Activate Your DataGo Account
Follow the instructions displayed on your smartphone to complete the DataGo account activation process.
Step 4: Purchase a Data Plan
Once your account has been successfully activated, select and purchase the mobile data plan you need.
Step 5: Enable Data in the DataGo App
Return to the DataGo app on your in-vehicle device.
On the app home screen, turn on the mobile data switch. Once enabled, your device can use the built-in SIM card to access the internet.
Important: Activating your DataGo account alone does not automatically enable cloud SIM data. You must also turn on the cloud SIM data switch on the DataGo app home screen before using the service.
EIOTCLUB vs. DataGo: What Is the Difference?
The main difference between EIOTCLUB and DataGo is how the SIM service is set up and activated.
EIOTCLUB requires you to insert a physical SIM card into the device. You then use the EIOTCLUB app to register your account, select and activate the required eSIM profile, and confirm the network connection.
DataGo, on the other hand, uses the built-in SIM card in the supported in-vehicle device. You activate your account by scanning the QR code displayed in the DataGo app, purchase a data plan, and then manually enable the cloud SIM data switch.
In short:
EIOTCLUB: Insert physical SIM card → Register in the app → Activate eSIM profile → Check network connection.
DataGo: Open DataGo → Scan QR code → Activate account → Purchase data plan → Enable cloud SIM data.
Frequently Asked Questions
Does EIOTCLUB require a physical SIM card?
Yes. A physical SIM card must be inserted into the device before setting up and using EIOTCLUB.
Do I need to restart my device after inserting the EIOTCLUB SIM card?
Restart the device if necessary after inserting the SIM card. This can help ensure that the device properly detects the SIM.
How do I activate DataGo?
Open the DataGo app on your in-vehicle device and scan the QR code displayed on the home screen using your smartphone. Follow the instructions to activate your account, purchase a data plan, and then enable mobile data in the DataGo app.
Can I use DataGo immediately after activating my account?
Not yet. Account activation alone does not automatically enable cloud SIM data.
After activation and purchasing a data plan, you must turn on the cloud SIM data switch on the DataGo app home screen before the device can use the built-in SIM card for internet access.
Do I need to purchase a data plan before using DataGo?
Yes. After activating your DataGo account, purchase the required data plan and enable the mobile data switch in the DataGo app.
Get Connected with EIOTCLUB or DataGo
Setting up EIOTCLUB or DataGo only takes a few steps.
For EIOTCLUB, insert the physical SIM card, register through the EIOTCLUB app, activate the required eSIM profile, and check your network connection.
For DataGo, open the DataGo app, scan the QR code to activate your account, purchase a data plan, and enable cloud SIM data from the app home screen.
Once these steps are complete, your device will be ready to connect to the internet using the selected mobile data service.