AC-HN9CBV2 In-Cabin Rear Camera User Manual

Designed for ATOTO V10 Series Car Stereos

Preface

Thank you for choosing ATOTO

As an innovative brand with a decade of dedicated expertise in automotive electronics, ATOTO upholds the core philosophy of "Different. Better. Trusted". We seamlessly integrate professional audio-visual technology and user-friendly interactive features to elevate every journey with refreshing experiences.

·Different – We deliver products that stand apart through thoughtful design, innovation, and user‑oriented features.

·Better – We integrate professional audio‑visual technology with intuitive interaction to elevate every journey with superior experiences at an accessible price.

·Trusted – Endorsed by millions of users worldwide, ATOTO has earned a reputation for reliable products and responsive service you can count on.

This philosophy guides everything we do—from long‑term R&D investment, to continuous product improvement, to prompt customer support. With ATOTO, you can always expect something different, something better, and above all, something trusted.

Copyright Statement

The copyright and related intellectual property rights of these manuals (including electronic and printed versions) are exclusively owned by ATOTO. Without explicit written authorization from ATOTO, no organization or individual may use the content in any form (including but not limited to copying, distributing, adapting, translating, mirroring, or reposting) for commercial purposes or provide it to third parties.

FCC Compliance Statement

The FCC Compliance Statement is an official declaration by ATOTO to users indicating that the product complies with the radio frequency interference and electromagnetic compatibility (EMC) regulations of the U.S. Federal Communications Commission (FCC). The specific statement is as follows:

This device strictly complies with all provisions of Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1.This device must not cause harmful interference;

2.This device must accept any interference received, including interference that may cause undesired operation.

Contact ATOTO Customer Support

If you encounter any issues during installation or use, our support team is ready to assist.

Email: support@atotoglobal.com

Important Information

About this Manual

This manual is designed to guide you through the basic installation procedures for ATOTO products.

Compatibility

The AC-HN9CBV2 In-Cabin Rear is designed specially for ATOTO V10 and A7 series car stereos. Do not attempt to use it with other car stereos to avoid compatibility issues or potential damage.

Installation Warnings

Exclusivity

The AC-HN9CBV2 In-Cabin Rear Camera is designed exclusively for ATOTO V10 car stereos. Do not attempt to use it with other systems to avoid compatibility issues or potential damage.

Vehicle Condition

For safety, always install or connect the receiver while the vehicle is turned off. Installing while the engine is running may cause electrical hazards or safety risks.

Wire Connection

Take extra care when wiring. Ensure that no wires, plugs, or ports are damaged during installation. After inserting each plug into its port, give it a slight twist to confirm secure and complete contact.

What's in the Box?

AC-HN9CBV2 In-Cabin Rear Camera

Extension Cable (6m/19.7ft)

Installation Introduction

Install the AC-HN9CBV2 In-Cabin Rear Camera

Step 1: Confirm the installation position of the camera — the upper-center area of the vehicle’s interior rear windshield.

Step 2: After selecting the installation position, install the AC-HN9CBV2 at the upper-center area of the vehicle’s interior rear windshield (Used to record the interior cabin view).

Step 3: Connect AC-HN9RRV3 to Your Car Stereo

(1) Connect the “C3” terminal of the extension cable to the “C3” terminal of the AC-HN9RRV3 cable.

(2) Attach the “CM3” terminal of the extension cable to the rear-view “Custom CAM3” terminal on the adapter cable.

(3) Plug the adapter cable into the corresponding port on the rear panel of the car stereo.

Step 4 When installing the AC-HN9CBV2 In-Cabin Rear Camera, refer to the wiring diagram below. Route the cable along the interior edges of the vehicle to keep it concealed.

Warning: The tape on the camera base is highly adhesive. Remove it carefully to avoid damaging the front windshield. If you are unable to remove it safely, please seek help from a professional.

Important Note:

Large Memory Capacity Support: Because the V10 Series Car Stereo supports up to a 256GB memory card and a 2TB external hard drive for video storage(USB1 Recording Storage), it can meet long-term recording storage needs when used together. (The memory card and hard drive are sold separately.)

Specification

Support and Assistance

If you have any questions during the installation of AC-HN9CBV2 & daily use, or you need help when you encounter difficulties, you can get help in the following ways:

·Contact the dealers or online sellers who provided you withAC-HN9CBV2;

·Send an email to support@atotoglobal.com. Our customer support team will reply within 48 business hours, and most emails will be responded to within 24 business hours.